building insulated material combustion tester
According to GB / T8626, ISO11925 development, suitable for the absence of external radiation conditions, with a small flame directly impact the vertical placement of the sample to determine the flammability of building products.Applicable to category B, C, D, E, Bfl, Cfl, Dfl and Efl related to building material testing, the unit provides a comprehensive solution for ease of use by the operator.
Building material burning performance testing machine meet the standards: EN ISO 11925-2, DIN 53438, DIN4102-1, GB / T 8626 and other standards.
technical parameters:
1, stainless steel structure box;
2, the inlet burner diameter Φ0.17mm, there are four Φ4 mm air conditioning holes;
3, the flame height adjustable, automatic ignition;
4, the flame application time and fuel time can be 0 to 99 minutes and 99 seconds to adjust;
5, gas pressure: 10KPa-50 KPa;
6, burning angle: 0 ° (vertical), 45 °
7, through the chassis outside the debug handle, the burner can move in the horizontal direction;
8, tempered glass door easy to observe the test;
9, stainless steel sample holder and sample template;
10, equipped with two kinds of stainless steel sample clip.Flame height gauge;
11, a high degree of experimental automation, experimental data accurate, easy to operate;
control system:
1, programmable controller (PLC) control:
2, automatic timing, automatic detection of flame, automatic ignition, ignition abnormal protection;
3, optional automatic detection of wind speed, 6 samples of experimental data preservation;
4, the text display display;
5, real-time monitoring of experimental data, query 6 experimental data, query the alarm content.
6, the experimental abnormal sound alarm.
在线联系供应商
Other supplier products
 |
Fiber fineness analyzer | Mainly used for the determination of wool, rabbit hair and other animal fiber diameter and other natural, artificial mixed, blended product fiber c... |
 |
Zipper Testing Machine of Reciprocating Pull | Zipper Testing Machine of Reciprocating Pull Testing Standards: QB/T 2171/2172/2173, BS 3084, AS 2332, NF G91-005, JIS S3015, DIN 3419-1, SATRA T... |
|
|
Electronic crockmeter | AATCC rubbing color fastness tester is the official test equipment of the United States Textile Chemists Association and printing and dyeing worker... |
 |
Leather Friction Color Fastness Test Machine Wholesale | This machine is suitable for all types of stain-resistant fur dry and wet rubbing fastness, and various types of fur products and fur leather goods... |
 |
Crosshatch scratch tester | IntroductionCrosshatch scratch tester/Scratch tester makes contacting relative motion between the scratching head and material surface for the eval... |
Same products
 |
Thrust Bearing Rolling Friction and Wear Testing Machine | 卖方: Standard International Group (HK) Limited | Applicable Standards: ASTM D3702 ASTM G99 ASTM G77 ISO 18535 Product Advantages: Simulates ... |
 |
Falling Sand Abrasion Test machine | 卖方: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | 卖方: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | 卖方: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | 卖方: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
