AC/DC Current Carrying Temperature Rise and Voltage Drop Test System
AC/DC Current Carrying Temperature Rise and Voltage Drop Test System - Other test instrument - standard
Product Information:
Application Scope of the AC/DC Current - Carrying Temperature - Rise and Voltage - Drop Test System for Automotive Wires:
1. Record the temperature change of conductors in connectors under a certain current. 2. Record the magnitude of the current passing through conductors in connectors at the set conductor temperature. 3. Record the changes in voltage drop. 4. Have a cyclic testing function.
Test Standards:Test requirements such as JASO D609: 2001. QC/T29106. QC/T 1067.1. QC/T417.1. TICW15. etc.
Main Parameters:
1) Input voltage: AC380V ±10%, 50Hz 2) Types of load power supplies: DC: switching power supply; AC: AC constant - current source 3) Operating current: AC: 1000A, open - circuit voltage: maximum 10V; DC: 10 - 1000A, open - circuit voltage: maximum output voltage 10V 4) Current output mode: Set by computer 5) Ammeter accuracy: ±1% + 3 digits 6) DC voltage drop: One range is 0.01mV - 199.99mV, and another is 0.1mV - 1999.9mV 7) Timing range: 0 - 9999.99H/M/S. When the timing is up, the current can be automatically cut off. 8) Eight - channel test temperature meters are standard - equipped, which can display and record in real - time the temperature values of T1C, T2c, T3C, T1s and the ambient temperature (Thermocouple type: T - type 30AWG thermocouple) 9) Temperature control and monitoring of the constant - temperature chamber
在线联系供应商
Other supplier products
 |
Hand cranking Textile Crockmeter ISO 105 D02 X12 AATCC 8/165 | Introduction Manual friction fastness tester is the most commonly used instrument for the textile industry to detect the color fastness of the fab... |
 |
Auto - ignition Point Tester for Liquids | Standards: This product complies with GB/T 21860 - 2008 *Test Method for Auto - ignition Temperature of Liquid Chemicals* and ASTM E659 - 78(200... |
 |
Photovoltaic module outdoor exposure test system/ photovoltaic weathering station/ IEC 61215 outdoor test system/ Solar panel outdoor exposure testing | Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval IEC 61730: Photovoltaic (PV) Module Sa... |
 |
Digital Autoburst Strength Tester | Standards: ASTM D3786, ERT 80-4-20, GB/T 7742.1, BS EN ISO 13938-1, BS 3424-6-B, ISO 3303-B, ISO 2758, ISO 3303.2, ISO 3689, JIS L1018,L1093, IW... |
 |
Motorcycle Helmet Sand Drop Tester | Main application Helmet abrasion resistance sand test machine is mainly used to test motorcycle helmets, sports helmets, electric vehicle helmets,... |
Same products
 |
Thrust Bearing Rolling Friction and Wear Testing Machine | 卖方: Standard International Group (HK) Limited | Applicable Standards: ASTM D3702 ASTM G99 ASTM G77 ISO 18535 Product Advantages: Simulates ... |
 |
Falling Sand Abrasion Test machine | 卖方: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | 卖方: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | 卖方: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | 卖方: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
