Automotive Interior Materials Droplet Characteristics Tester
Automotive Interior Materials Droplet Characteristics Tester - Automotive Interior - standard
Standards:
1. 1995L0028-EN-01.01.2007-002.001-25 ( ANNEX V) Measurement method of melting properties. 2. NF P92-505 Dripping test with electrical radiator, used for melting materials. 3. EU 95/28/EC European parliament and of the council of 24 October 1995 relating to the burning behavior of materials used in the interior construction of certain categories of motor vehicle.
Applications:
It’s used to evaluate the melt dripping and burning performance for hot melt materials under the main heat source.
Product Information:
Introduction
Automotive interior materials droplet characteristics tester determine the materials’ droplet properties according to ECE R118 Appendix 7. This mechanical and electrical control tester is suitable for measuring the melting state of automotive interior materials in the specified radiation heat radiation.
Technical Parameter
Technical Parameter
| Items | Parameters |
| Power output of radiation heat source | 500W |
| Radiating surface of radiation heat source | Transparent glass plate, Φ (100 ± 5) mm |
| Sample support: | Φ118mm stainless steel ring with φ0.70mm, 2.10mm mesh stainless steel mesh in it. |
| residue container | Inner diameter 118mm, depth 12mm |
| Sample size | 70×70(mm), The thickness is no more than 13 mm |
| Distancefrom residue container to the sample rack | 300mm |
| The range of heat flux meter | 10W/cm2 |
| working power supply | AC220V, 50Hz, ≤1000W |
| The distance from the surface of the specimen to the surface of the radiation source | 30mm |
| Dimension | (Wide) 1120mm×(Depth)520mm×(Height)1250mm, vent hole Φ 100mm |
在线联系供应商
Other supplier products
 |
Pinch Fold Tester | Standards: LP-463KB-28-01 Method C，TSL 5100G Section 4.29 Applications: This pinch fold tester is designed to conduct Chrysler LP-463KB-28-01typ... |
 |
MARK-II Slip Resistance Tester | Product Introduction: Paste the cut sample on the test fixture of the portable MARK-II anti-slip testing machine, put down the weight of the rotat... |
 |
Appliance Stability Tester | Product Introduction: The device conforms to GB4706-1 Article 20.1, IEC60335-1 Article 20.1 and other standards. The device is composed of a workb... |
 |
Voltage Drop Tester for Automotive Wire Connectors | Voltage Drop Tester for Automotive Wire Connectors - Other test instrument - standard Product Information: The voltage drop tester for automotive... |
 |
Dry microbial penetration resistance tester | DryMicrobial Penetration Resistance Testeris designed to determine determine the penetration resistance of material to bacterial on dry particulate... |
Same products
 |
Thrust Bearing Rolling Friction and Wear Testing Machine | 卖方: Standard International Group (HK) Limited | Applicable Standards: ASTM D3702 ASTM G99 ASTM G77 ISO 18535 Product Advantages: Simulates ... |
 |
Falling Sand Abrasion Test machine | 卖方: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | 卖方: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | 卖方: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | 卖方: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
