Protective Clothing Against Acid and Alkali Tester
Protective Clothing Against Acid and Alkali Tester - Textile and Apparel - standard
Standards:
GB 24540-2009《protective clothing against liquid acids and alkalis 》Appendix D ISO 6529-2013 Protective clothing-protection against chemicals-determination of resistance of protective clothing materials to permeation by liquids and gases. BS EN 463-1995 Protective clothing-protection against liquid chemicals- Test method determination of resistance to penetration by a jet of liquid (Jet test) BS EN 468-1995 Protective clothing– protection against liquid chemicals, performance requirements for chemical protective clothing with spray-tight connections between different parts of the clothing( type 4 equipment)
Applications:
It can be used for waterproof moisture-penetrability testing of high density fabric, laminated fabric, coating fabric and other materials , such as canvas, felt, tarpaulin , cover cloth, airtight fabric, outdoor sports material, umbrella testing and waterproof material testing et. It can be also used to anti body liquid and anti-blood penetration testing for medical protective clothing, anti chemical liquid penetration testing for chemical resistant protective clothing penetration performance testing of ventilate waterproof non-woven fabrics or filter fabrics, it can be also used for anti permeability testing of paper and carton
Product Information:
Protective clothing against acid and alkali tester is developed according to latest GB24540-2009 《protective clothing-acid and alkali chemical protective clothing》. Sorted by the inspection items, this device can be divided to static acid pressure tester, acid and alkali repellant tester, and acid penetration time tester. It is mainly used to test the against acid and alkali performance of the protective clothing. Widely used in protective clothing manufacturing enterprise and every quality testing bureau Protective clothing chemical resistance tester is mainly used to test the breathable type protective clothing anti acid and alkali performance. The testing liquid flow on the surface of the specimen, check whether the liquid retention or penetration, and calculate the anti acid and alkali index.
Features
Technical Parameters
| Item | Parameters |
| Half cylinder type PTFE | Can be corrode by 80% strong hydrochloride for over 6 years |
| Transparent groove | Internal diameter（125±1）mm，L（300±0.5）mm，Incline 45° |
| Injection syringe | Capacity（10±0.2）mL，Pinhole diameter（0.8±0.01）mm |
| Little beaker | Capacity is of 50 mL |
| Flat head needle tip | Bottom to groove bottom :100mm |
| Specimen size | （360±2）mm×（235±2）mm |
| Micro computer auto injection system | （Special computer board card control, accurate and reliable） |
| Jet velocity | Within 10±0.2 s spray continuously （10±0.2）ml liquid |
在线联系供应商
Other supplier products
 |
Bag opening machine | Scope of application: Single lip bags, double lip bags, zipper bags, side pockets, flaps, pocket openings, collars, etc. are cut and sewn. Machin... |
 |
KES - FB2 - SH Single - Strand Bending Tester | Content The Single Fiber Bending Tester makes it possible to easily measure and quantify softness, elasticity, and diffusion differences in a si... |
 |
Thermal cycle wet freezing testing machine | Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval UL 1073: Standard for Safety for Enclo... |
 |
Convective Heat Resistance Tester | Standards ISO 17493 Clothing and equipment for protection against heat - Test method for convective heat resistance using a hot air circulating ov... |
 |
电池冲击测试仪 | 产品介绍 将测试样品电池放置在平坦表面上，一根直径为 15.8±0.2 毫米（5/8 英寸）的杆以十字形放置在样品中心上方。将 9.1 公斤或 10 公斤的重物从一定高度（610 毫米或 1000 毫米）落到样品圆柱上。 电池进行冲击试验时，其垂直轴应平行于平面，并与钢柱的垂... |
Same products
 |
Thrust Bearing Rolling Friction and Wear Testing Machine | 卖方: Standard International Group (HK) Limited | Applicable Standards: ASTM D3702 ASTM G99 ASTM G77 ISO 18535 Product Advantages: Simulates ... |
 |
Falling Sand Abrasion Test machine | 卖方: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | 卖方: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | 卖方: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | 卖方: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
