.

Paper folding tester

Paper folding tester - Other test instrument - standard


Product Information:

Test principle

The machine uses the motor drive screw to move the fixture. The test fixture is placed between the upper and lower sets, and then press the test key. The upper pressure plate senses the load element on the upper pressure plate and converts the force into a signal to the computer monitor.

Technical parameter

Capacity: 2.5—56KGF/CM2

Resolution: 0.2KGF/CM2

Induction mode: Pressure transducer

Force unit: KPA, LBS/IN2, KGF/CM2

Pressure speed: 170+15ML/MIN

Ring material: stainless steel SUS#304

纸张耐折度测试仪.jpg

纸张耐折度测试仪.png


在线联系供应商

至: 标准集团
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Fully automatic membrane pore size analyzer ASTM316  GB/T32361-2015
Fully automatic membrane pore size analyzer ASTM316 GB/T32361-2015 Standards: ASTM316. GB/T32361-2015 Applications: Scope of use: Suitable for samples of various materials such as polymers, ceramics, glass, met...
GMA Ultra-filtration Membrane Porometers  ISO 4003-1990 ASTM F316-2003
GMA Ultra-filtration Membrane Porometers ISO 4003-1990 ASTM F316-2003 Standards: ASTM F316-2003. ASTM D6767-2002. ASTM E1294-1999. ISO 4003-1990. GB/T 14041.1-2007. HY/T 051-1999. HY/T 064-2002 Applications: Based ...
Fabric drilling machine
Fabric drilling machine Applications Electric heating drill is applicable to drill the hole of mark in tailor process of cloth, also usded for fixing a pile of fabric whe...
System of Spinal Pedicle Screw-Rod System Torsional Fatigue Tester
System of Spinal Pedicle Screw-Rod System Torsional Fatigue Tester Standard YY/T 0857-2011 (China): Specifies torsional fatigue testing protocols for spinal pedicle screw-rod systems, including load ratios, freq...
HIGH SPEED LOCKSTITCH BAR TACKING MACHINE
HIGH SPEED LOCKSTITCH BAR TACKING MACHINE Applications High Speed Lockstitch Bar Tacking Machine is applicable to for various types fabric and thickness, suitable for light and medium weig...
供应产品

Same products

Falling Sand Abrasion Test machine
Falling Sand Abrasion Test machine 卖方: Standard International Group (HK) Limited The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance...
Conveyor Belt Drum Friction Testing Machine
Conveyor Belt Drum Friction Testing Machine 卖方: Standard International Group (HK) Limited Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes...
Dry Sand Rubber Wheel Wear Tester
Dry Sand Rubber Wheel Wear Tester 卖方: Standard International Group (HK) Limited The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater...
Sliding Bearing Fatigue Testing Machine
Sliding Bearing Fatigue Testing Machine 卖方: Standard International Group (HK) Limited The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua...
High temperature vacum friction & wear tester
High temperature vacum friction & wear tester 卖方: Standard International Group (HK) Limited The working principle of a high-temperature vacuum friction and wear testing machine is to simula...