Mask Tensile Testing Machine
Standards:
GB/T 3917.2 Textiles-Tear properties of fabrics-Part 2 Determination of tear force of pants shaped test specimens (single slit) GB/T 3917.3 Textiles-Tear properties of fabrics-Part 3 Determination of tear force of trapezoid-shaped test specimens GB/T3923.1 Textiles-Tensile properties of fabrics-Part 1 Determination of breaking force and elongation at breaking force- Strip method
Applications:
It can used for a variety of textiles and automotive interior materials tensile strength, tensile break elongation (or elongation rate) test. It can also be used for zipper, leather strength test.
Product Information:
The test machine uses the integrated structure of the motor and the speed control system to drive the synchronous belt deceleration mechanism, and drives the lead screw pair to load after deceleration. The electrical part consists of a load measuring system and a deformation measuring system. All control parameters and measurement results can be real time displayed on the LCD screen. And it has overload protection, displacement measurement and other functions. It can used for a variety of textiles and automotive interior materials tensile strength, tensile break elongation (or elongation rate) test. It can also be used for zipper, leather strength test.
Calibration
Being ready for four rank standard special gravity weight or 0.3 level standard dynamometer.
Adjusting into the test control process and result analysis interface, exert force to the sensor, observe the force value display on screen and readings from the dynamometer are the same or not, if the deviation is comparatively large, presskey, while the status display shows "standard", as shown on the right.
In the calibration state, you can use key to adjust the force value (coarse adjustment, the range of adjustment is comparatively larger), can also use key to adjust the force value (fine-tuning, the range of adjustment is comparatively smaller), to make force value and real force value (ie dynamometer) match, and finally press the "confirm" button .
Technical Parameters
| Items | Parameters |
| Maximum test force | 3000N |
| The minimum resolution of the test force | 0.1N |
| Test force indication error | ± 1% |
| Maximum stroke | 1000 mm |
| Displacement minimum resolution | 0.01mm |
| Displacement accuracy | ± 1% |
| Beam moving speed | 1-500mm / min, continuously variable, using DC servo motor and control system |
| Liquid crystal display content | test force, displacement, peak, running etc. |
| Host weight | 200 kg |
| Testing machine size | 600 × 400 × 1700 mm |
在线联系供应商
Other supplier products
 |
Paper smoothness meter | Paper smoothness meter - Other test instrument - standard Product Information: Implementation standards: ISO 5627 Paper and board - Determinatio... |
 |
Helmet Webbing Micro - displacement Abrasion Tester | Main Purposes It is used to detect the abrasion condition of the webbing, the micro - displacement performance of the webbing, and the fatigue lif... |
 |
Safety hat antistatic performance tester | Safety hat anti-static performance tester according to the new national standard GB/T 2812-2006 "Safety hat test Method", GB/T 2811-2019 "Safety ha... |
 |
G645 leather shoe hook stiffness testing machine | Product Introduction: Leather shoe hook stiffness tester is suitable for measuring the longitudinal bending stiffness of leather shoe hook. The pr... |
 |
Respirator Fit Tester | Product Information The Protective Mask Leak Tester is a portable device designed to detect the service performance and applicability of protectiv... |
Same products
 |
Battery Diaphragm Gas Permeability Tester ISO | 卖方: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Battery Diaphragm Gas Permea... |
 |
Torsion Testing Tester ASTM, JIS, and DIN | 卖方: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Universal Torsion Testing Ma... |
 |
Wire Torsion and Winding Tester ASTM and JIS | 卖方: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Wire Torsion and Winding Tes... |
 |
Metal Wire Repeated Bending Tester ISO/DIS 7801 | 卖方: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Metal Wire Repeated Bending ... |
 |
Metal Wire Wrap Tester ISO 4101 | 卖方: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Metal Wire Wrap Tester is de... |
