N,NU,NJ,NF系列 圆柱滚子轴承
Cylindrical roller and raceway are the line contact bearings.With great load capacity,mainly bear radial load.Rolling body and ring wall have small friction,suitable for high speed rotation.According to whether rib or not,can be devided into NU、NJ、NUP、N、NF single row bearings etc. And NNU,NN double-row bearings etc. The bearing structure is of inner ring and outer ring can be separated. Inner ring or outer ring without rib of cylindrical roller bearings,inner ring and outer ring can do relative movement in axial direction,so it can be used as free end bearing.On the one side of inner ring and outer ring with double ribs,on the other side of ring with single rib of cylindrical roller bearings,Can be withstand certain degree and one direction axial load.General use steel stamping cage,or copper alloy cage.But some of use polyamide shaped cage .
1,Roller and raceway is line contact or offline contact, great radial load capacity,suitable for withstanding heavy load and impact load.
2,Small friction coefficient ,suitable for high speed,limiting speed near to deep groove ball bearings.
3,N type and NU type can do axial movement,can adapt relative position change which caused by thermal expansion or installation error between shaft and housing,can be used as free end bearings.
4, Higher requirment for processing shaft or seat hole,And outer ring axis relative deflection after installation should be strictly controlled,so as to avoid contact stress concentration.
5, Inner ring or outer ring can be separated,which are easy installation and removal
Other supplier products
|
|
双杆回转驱动副 |
Four point contact ball slewing rings have a single row of balls, a standard bearing raceway, and four points of contact between the balls and race... |
|
|
单排交叉滚子轴承 |
Four point contact ball slewing rings have a single row of balls, a standard bearing raceway, and four points of contact between the balls and race... |
|
|
单向推力球轴承 |
1:Size:20mm-500mm.
2:Row material: Gcr15 & Gcr15SiMn.
3:Quality leave:P0,P6,P5,P4.
4:Brand: HOGO or OEM.
5:MOQ:1 set can supply.
6:Packaging: ... |
|
|
挖掘用转盘轴承 |
Slewing Bearing For Excavator
Posted at: Offers to Sell and Export | Posted on: Thu 07 Jun, 2012 10:24 am
Bore Size 300 - 5000 mm
Outside ... |
|
|
大型转盘轴承 |
SBI Slewing ringbearing :higher speed, extra large size contact ball bearings, thing section ball bearing ISO9001:2008Approval Luoyang SBI Special ... |
供应产品
Same products
