Solar module framing machine
Model Name GSFM-2011
Maximum group-frame outside dimensions(four squares) 2000×1100×（35～50）mm
Minimum group-frame outside dimensions(four squares) 350×350×（35～50）mm
Framing precision The tolerance of the oppose sides: ±1mm
Diagonal size of the difference ±1.5mm
Air pressure 0.4Mpa~0.7Mpa
Hydraulic pressure 1.0Mpa~15.0Mpa
Angular deviation of four square ±0.5°
Power of the group frame Aerodynamic Hydraulic power
Outside dimensions 2900mm×1900mm×970mm
Control model Manual
Weight 1200kg
Other supplier products
|
|
Solar module EL tester |
Model Name 610 Micro-cracks EL Tester
Resolution 6.1 million by pixels 3032*2016
Testing Range technogenic contamination, material defects, m... |
|
|
Solar module laminator |
The Laminator is the equipment that performs the encapsulation of solar cells into the PV glass with the help the polymerization of encapsulation m... |
|
|
Solar cell tester |
Model Name GTC-3A GTC-B
LampSpectrum Inlinewithiec60904-9spectralIrradiancedistributionrequirement(AM1.5)
Lightintensity 100mW/cm2(continuousad... |
|
|
Solar module tester |
Model Name GSS--2012
Lamp Spectrum In line with iec60904-9 spectral Irradiance distribution requirement(AM1.5)
Light intensity 100mW/cm2 (cont... |
|
|
Semi-automatic solar module laminator |
The Laminator is the equipment that performs the encapsulation of solar cells into the PV glass with the help the polymerization of encapsulation m... |
供应产品
Same products
