Protective Clothing Horizontal Vertical Flame Spread Tester
Protective Clothing Vertical Flame Spread Tester is made according to ISO 15025 standard. It can test the flame spread state under the small flame .
It is used to simulate the protective clothing is at the risk of ignition to assume the flame spread performance .
It is also suitable for the fabric material or other similar functional use of combustible materials .
Application：
The instrument is applied for the testing of fire hazard using com-bustible materials, like fabric or other similar functional materials.
Standard:
BS EN ISO 15025:2002
Technical Parameters：
Items:Parameters
Dimension:1200mm X 600mmx 1200mm
Timer accuracy ：0.1s
Power supply ：220v，50/60Hz
Features:
1. The combustion chamber is made of stainless steel; nice, corrosion-resistant;Dimension: 1200mm X 600mmx 1200mm
2. All sample holder is made of stainless steel manufacturing,corrosion resistance;
3. Standard burner; flame height level 25mm ± 2mm; vertical 40mm ± 2mm; nozzle opening 0.19mm;
4. The time is automatically recorded, automatic storage; timer accuracy 0.1s;
5. PLC with touch screen control system; to achieve more intelligent test; automatically record test data, automatic storage;
6. Imported brands gauge and control valve, the gas pressure is more stable;
7.Imported needle valve, precise control of the flame height; flame is more stable;
8.High intelligence, simple operation, easy to operate;
9.With the bottom surface of the combustion and combustion of two sample holder; made of stainless steel;
10.Automatic ignition system, automatically turns off;
11.Equipped with a flame height gauge;
12.Pulsed high voltage electronic automatic ignition.
13.Timing button with the PLC automatically record storage combustion time-consuming.
14.Without holding the stopwatch or timer manuscript; the system automatically records the test of time, and generate test reports;
15.The test time and time plus a touch screen can be set to fire. Meet a variety of test standards;
16.Surface combustion and bottom surface combustion burner test program on the touch screen can be switched.
Other supplier products
|
|
astm d3786 pneumatic bursting strength tester |
Pneumatic Bursting Strength Tester for Textile is used for the detection of woven, knitted, non-woven fabrics, paper or board about the bursting st... |
|
|
IEC60695 Needle Flame Tester |
Standards:GB / T 4207-84, IEC 6112, ASTM D3638, DIN 53480 and UL 746A test methodsScope of application:Needle flame tester used not only for low-vo... |
|
|
ASTM E1354 Cone Calorimeter for Building Materials |
StandardsApplication
ISO 5660Reaction to fire tests-Heat release, smoke production and mass loss rate.ASTM E 1354Method of test for heat and smoke... |
|
|
Thermal Contact Tester |
The instrument is designed for the assessment of materials and material combinations that are exposed to a heat radiation source.In procedure A exp... |
|
|
Dry Cleaning And Washing Cylinder |
Dry Cleaning And Washing Cylinder
Testing Standards:
AATCC 162, 16 CFR Part 1610
Applications:
Dry Cleaning and Washing Cylinder is designed for de... |
供应产品
Same products
