Water For Injection (WFI) Generation System
Biocell wfi water systemadopts an advanced three-stage separation WFI generation process of steam and water, and the quality of produced water meets the standards of Chinese, American, and European Pharmacopoeia, GMP, FDA, and other certification requirements; Humanized design, modular installation, small floor area, stable operation, one button start, simple operation and maintenance, high efficiency, and energy saving.
DIFFERENT TYPES OF WFI GENERATION SYSTEM
WHAT IS THE WFI GENERATION SYSTEM WORKING PRINCIPLE?
The WFI systemin pharmaceutical industry has low investment cost, low operation, and energy consumption, and can operate continuously and dynamically. Under the condition of low-temperature storage and turbulence, water for injection machine can effectively control the microbial breeding risk of the whole system and can realize large-scale water supply.
WHAT IS WATER FOR INJECTION (WFI)？
Water for injection generation(WFI) is a high-purity water used in the pharmaceutical industry for the preparation of injectable medications and medical devices. WFI system must meet strict quality standards to ensure that it is free from microbial and chemical contaminants that could harm patients.
What Is WFI Generator Used For
The water for injection machine(WFI) system is used as a diluent or solvent for drugs that are administered by injection, including intravenous, intramuscular, and subcutaneous injections. It is also used as a component in the preparation of medical devices, such as wound dressings and contact lenses.
The high purity of WFI is critical to ensure the safety and efficacy of the medications and devices prepared with it. Even trace amounts of contaminants can cause adverse reactions in patients, such as infections or allergic reactions. Therefore, water for injection systems is subject to strict quality standards and is regularly tested to ensure that it meets the required specifications.
WFI Generation Process
The generation of water for injection (WFI) system in the pharmaceutical industry typically involves a multi-step process to remove impurities and contaminants from the feed water. The WFI generation process may include the following steps:
Pretreatment: The first step is to remove large particles and suspended solids from the feed water. This may be accomplished by using filters, such as sand or cartridge filters.
Reverse osmosis (RO): The pretreated water is then passed through a reverse osmosis membrane, which removes dissolved salts and other impurities. RO uses high pressure to force water through a semi-permeable membrane that separates the water from dissolved salts and other contaminants.
Electrodeionization (EDI): The RO permeate is then passed through an electrodeionization (EDI) module, which uses a combination of ion exchange and electrochemical processes to remove the remaining ions from the water.
Distillation: In some cases, WFI is generated by distilled water. This involves heating the feed water to generate steam, which is then condensed to produce high-purity water.
Ultrafiltration: Ultrafiltration is a process that can be used in combination with the other steps to remove endotoxins and other small particles from the water.
What Is Water for Injection (WFI)？
WFI By Distillation
At present, water for injection system (WFI) is mainly obtained by the following thermal distillation methods:
Multiple Effect Distillation Units
Single Effect Distillation Units
Single-effect or multi-effect thermal distillation is the most popular production method of water for injection (WFI) equipment. The main advantages of this method are a simple design, and no moving parts used in the WFI water generation process, so it has reliability. Since the process is carried out at high temperatures, the method has full confidence in the microbial purity of the water obtained.
water for injection system
SECOND
Cold WFI by Membrane Methods
When using the whole membrane method to prepare cold water for injection, special attention should be paid to the design of regular sanitary treatment of the system. Cold process is always more susceptible to microbial contamination than traditional hot distillation. The cold WFI power generation equipment shall be cleaned regularly, preferably by thermal disinfection.
For more informationabout water system pharmaceutical industry,please feel free to contact us!
在线联系供应商
Other supplier products
 |
CLEAN STEAM GENERATOR | The prototype of the clean steam generator is a pure steam generator in the pharmaceutical industry. In structural design, it simplifies and weaken... |
 |
PHARMACEUTICAL REVERSE OSMOSIS SYSTEM | With RO membrane separation technology as the core, it adopts automatic control, integrated design, modular installation, low energy consumption an... |
 |
ELECTRIC CLEAN STEAM GENERATOR | Clean steam generator using electric energy as heating source is referred to as electric heating clean steam generator. The steam generated after t... |
 |
PHARMACEUTICAL REVERSE OSMOSIS SYSTEM | With RO membrane separation technology as the core, it adopts automatic control, integrated design, modular installation, low energy consumption an... |
 |
MULTI-EFFECT DISTILLER | Multiple Effect Distillation The water for injection preparation system is a key GMP system. Multi effect distilled water machine is the key equ... |
Same products
 |
拓纷生物制药冻干机 TF-LYO-2 | 卖方: 上海拓纷机械设备有限公司 | LYO生物制药冷冻干燥机采用标准化制造工艺生产，降低制造成本，缩短生产周期，同时确保性能和可靠性。冷冻干燥机的设计优先考虑安全性、多功能性、可靠性和长使用寿命，同时也确保用户和环境的安全。该设计... |
 |
TOFFON冷冻干燥机TF-LYO-0.5冻干机 | 卖方: 上海拓纷机械设备有限公司 | LYO 生物制品冷冻干燥机是一种用于生物制药的专用机器，用于保存和储存蛋白质和疫苗等生物制品。它通过在低温下冷冻生物物质，然后在真空环境中除去水分，从而获得稳定，长期干燥的产品来实现这一目标。该... |
 |
PHARMACEUTICAL REVERSE OSMOSIS SYSTEM | 卖方: Nanjing Biocell Environmental Technology Co., Ltd | PHARMACEUTICAL REVERSE OSMOSIS SYSTEM With RO membrane separation technology as the core, the re... |
 |
SANITARY HEAT EXCHANGER | 卖方: Nanjing Biocell Environmental Technology Co., Ltd | SANITARY HEAT EXCHANGER The wfi sanitary heat exchanger(sterile double tube plate heat exchanger... |
 |
CLEAN STEAM GENERATOR | 卖方: Nanjing Biocell Environmental Technology Co., Ltd | CLEAN STEAM GENERATORS The prototype of the clean steam generatorfor humidification is a pure st... |
