500m Drilling depth Full Hydraulic Crawler Mounted Water Well Borehole Drilling Rig

• Traveling device: equipped with new traveling motor and reducer, with long service life.
• Hydraulic oil pump: imported from Italy, parallel gearbox design, oil pump separation, provide.
• Sufficient and reasonable power distribution. The advanced hydraulic system has unique design, simple maintenance and low cost.
• Power head device; the box body is integrally formed, and the dual motors provide greater power, greater torque, more durability, and lower maintenance costs.
• Drilling rig chassis; (professional drilling rig chassis), classic and durable, load-bearing, wide chain plate width, less damage to hard roads.
• Lifting force: The designed composite boom is used, which is small in size, long in stroke, double-cylinder lifting force, and large in lifting tonnage of the rig; the boom configured on the rig body is equipped with a limit device to protect the safety of the oil cylinder. ensure work safety.
• Each hydraulic oil pipe is covered with a thick protective sleeve, which makes the oil pipe have a longer service life.
• The independent heat dissipation dual system adopts hydraulic oil temperature cooling and is equipped with traditional air cooling. long engine life.
• Dual system: 1. Air power system with air compressor 2. Mud pump system with mud pump.

Optimal Hole Range: φ140-350

Hole depth.Max: 500m

The weight （T）	9.5
The hole diameter （mm）	140-350
Drilling depth （m）	500
One-time advance length （m）	6.6
Walking speed （km/h）	2.5
Climbing angles （Max.）	30
Equipped capacitor （kw）	118
Using air pressure （MPA）	1.7-3.5
Air consumption （m³/min）	17-42
Swing speed（rpm）	45-130
The penetrationefficiency （m/h）	15-35
Drill pipe diameter （mm）	φ102 φ108 φ114
Drill pipe length （m）	1.5m 2.0m 3.0m 6.0m
Rig lifting force （T）	26
Rapid rise speed （m/min）	20
Fast feedingspeed （m/min）	40
Width of loading（m）	2.85
Hoisting force of winch （T）	2
Swing torque （N.m）	7500-10000
Dimension （mm）	6150×2200×2600
Equipped with hammer	Medium and high wind pressure series
High leg stroke （m）	1.6

Other supplier products

	600m Drilling depth Factory Price Water Well Drilling	adopts full hydraulic control, the top drive drives the drilling tool to rotate, and the drilling efficiency is high. Using Cummins 113kw genera...
	845-1 Φ115-165mm Separated Open-pit Down-the-hole Mine Drilling Rig	This series of separated DTH (Down-the-Hole) drill rigs has been primarily used in small and medium-sized quarries, cement mines, open-pit coal min...
	D545T Φ115-138mm Integrated Down The Hole Dth Drill Rig	While maintaining high drilling efficiency and low energy consumption, the [equipment/model name] is well-suited to meet rock drilling requirements...
	454H Φ115-152mm Integrated Dth Surface Blasting Hole Drill Rig Rock Drilling Machine	While maintaining high efficiency and low energy consumption, this rig is capable of meeting the drilling requirements for blast holes (115 mm&ndas...
	452H Φ90-138mm Integrated Dth Surface Drill Rig	While maintaining high efficiency and low energy consumption, it fulfills rock drilling requirements for holes with diameters of 115mm and 138mm, b...

供应产品

Same products

	YZH stationary hydraulic rock breaker	卖方: 广西元征行机械设备有限公司	一、精准破拆，告别堵卡困扰 从现场作业图中可以清晰看到，元征行固定式液压碎石大臂正高效地对格筛内的矿石进行破碎作业。其核心优势在于： 精准作业：大臂可灵活调整角度与力度，精准打击堵卡的矿石，...
	YZH WHEN1500固定式液压机械臂	卖方: 山东伊润基础工程有限公司	以下是YZH WHEN1500固定式液压拆除臂的详细介绍，包括其特点、优点和案例研究：YZH WHEN1510固定式底座碎石机臂的特点：智能多模式控制：支持驾驶室操作、无线/有线远程控制、光纤+...
	YZH WHEN1410固定式底座碎石机	卖方: 山东伊润基础工程有限公司	YZH WHEN1410固定式底座碎石机是一种专为采矿、冶金及相关行业大型物料的二次破碎而设计的专用设备。通过更换附件（如液压锤或莲花爪），它可以执行多种功能，包括破碎、抓取和拆除。 WHEN...
	YZH WHEN 1300固定式底座碎石机	卖方: 山东伊润基础工程有限公司	WHEN 1300固定式底座碎石机的特点：智能多模式控制：支持驾驶室操作、远程控制和视频监控。远程控制范围可达10-20km，集成有线/无线双模操作。配合高性能控制器，可实现精确定位和灵活控制。...
	WHE1500 Pedestal Breaker Boom Systems	卖方: 山东伊润基础工程有限公司	WHE1500底座式断路器臂架系统的特点： WHE1500底座破碎机臂系统是一种集机械、电气和液压系统于一体的专用二次破碎装置。其设计解决了采矿、冶金和相关行业中的材料堵塞和大块破碎挑战。 采用...