Recycling Used Plastic PP PE Film Agglomerator Densifier/Impact Machine

Recycling Used Plastic PP PE Film Agglomerator Densifier/Impact Machine

PVC Board Extrusion Line

PVC Plastic Artificial Marble Sheet Production Line

Plastic Pelletizing Machine

Recycled PVC Pelletizing Machine

Water-Ring Pelletizing For Plastic Granules

PVC & PE Single Screw Extruder

Recycling Used Plastic PP PE Film Agglomerator Densifier/Impact Machine

Application:PP PE film, fiber,etc

Screw Design:6+2, Fixed and rotational blades

Approximate capacity:100-800kg/h

Warranty:12 months

Agglomerator machine using friction heat principle, make thermoplastic films direct crushing and granulation.

The Plastic agglomerator is used for granulating waste thermoplastic thin films with wall thickness less than 2 mm. such as, high and low density polyethylene, polypropylene(PP) and polystyrene(PS), usually, the customer usually use it for the recycled film material, after crushing washing drying, the recycled PP/PE film scrap still contains 5-20% mositure, which will cause big problem for the next procedure of extruding, at the same time, the recycled film scrap takes relatively large space, so it's better that we can have a machine which can reduce the size of recycled scrap and evaporate the mositure, that's why the agglomerator comes.

Working principle for agglomerator machine:

Putting waste products into agglomerator pot body and quickly cutting by the high speed rotating and fixed blade shear.

The material turning up and down by paddle and from all around to move towards to the center of the pot body.

The friction of material and pot wall and blades produce much friction heat under the high speed, making the materials temperature rises to the half-plastic condition and connects to small lump.

Before the materials will block, put preparation quantitative water spraying to material.

The cold water touch the hot materials will gasify and take out the surface heat soon , making the surface of the materials cool quickly and avoid blocking, then after crushing effect between rotary blade and fixed blade to cut into particles(irregular size materials). During the crushing, Also may join the appropriate color pigments according to needs.

Technical parameter

Model	Volume(L)	Effective	Motor	Mainshaft	Capacity	Heating	Discharge
		Volume(L)	Power(KW)	Speed(rpm)	(kg/h)	Method	Method
ZL-100	100	75	30	800	80-100	By self friction	Manually or Pneumatic
ZL-200	200	150	45	800	150-200
ZL-300	300	225	75	800	250-300
ZL-500	500	375	90	750	450-500
ZL-800	800	600	132	750	750-800

Other supplier products

	PVC H Joint Corner /F Edge corner /U Edge Trim Ceiling Corner Line Profile Extrusion Line	PVC H Joint Corner /F Edge corner /U Edge Trim Ceiling Corner Line Profile Extrusion Line PVC Board Extrusion Line PVC Plastic Artificial Marble ...
	PP PE PET Water Cooling Strands Pelletizing Granules Plastic Extruder Production Line	PP PE PET Water Cooling Strands Pelletizing Granules Plastic Extruder Production Line PVC Board Extrusion Line PVC Plastic Artificial Marble Shee...
	Low Price PP PE Water-ring Pelletizing for Plastic Granules	Low Price PP PE Water-ring Pelletizing for Plastic Granules PVC Board Extrusion Line PVC Plastic Artificial Marble Sheet Production Line Plastic...
	PVC Cable Trunking Extrusion Line / PVC Wire Duct Making Machine,PVC Electric Conduit Pipe Making Machine	PVC Cable Trunking Extrusion Line / PVC Wire Duct Making Machine,PVC Electric Conduit Pipe Making Machine,PVC Corner Profile Production LinePVC Boa...
	Newly HDPE single wall corrugated pipe making machine for electric cable wire	Pipe Diameter:16mm-630mm pipe belling mach,Working on:pipe production line or as single Oven Quantity: single oven or double oven to choose,Heat...

供应产品

Same products

	HD韩东空压碟式制动器、气动碟式刹车、气动制动器DBH-103	卖方: 上海韩东机械科技有限公司	这是一种气动式卡钳盘式制动器。当通入压缩空气时，气缸推动刹车片夹紧制动盘，产生制动力矩。通过调节气压可连续调整制动力矩，实现放卷和收卷过程中的稳定张力控制。 该产品具有优异的散热性能、稳定的滑移...
	Injection Molding Machine	卖方: Taizhou Qihong Mold Co., Ltd.	Taizhou Qihong Mold Co., Ltd. provides solutions for plastic manufacturing with a focus on inject...
	Semi-Automatic Blowing Machine	卖方: Taizhou Qihong Mold Co., Ltd.	Taizhou Qihong Mold Co., Ltd. offers Semi-Automatic Blowing Machine solutions for manufacturing p...
	JY-160S2 Standard Plastic Injection Machine	卖方: Dongguan Jieyang Machinery Co., Ltd	Straight screw ejected assembly. Two(three)-phase temperature, ejected speed, backing pressure a...
	WPC 木塑室外地板挤出生产线	卖方: Qingdao Trusty Plastic Machinery Co.,Ltd	木塑复合材料（WPC）与木材不同，具有更高的耐腐蚀性和耐温性。其低残余湿度和多孔结构也赋予了它更高的强度。凭借这一特性，WPC地板（或甲板）被广泛应用于各种休闲场所的建造，如夏季咖啡馆、凉亭和门...