Ring chamber orifice meter
Ring chamber orifice meter
Product name:Ring chamber orifice meter
Product code:151116-813
Update time:2015.08.25
Views:860
Processing custom origin:in kaifeng
Type:type throttling device LWG
Type:volumetric flowmeter
Measuring range:0-100 (m3 / h)
Level of accuracy:+ / - 1.0%
Nominal size:(DN50- DN2600 (mm)
Job stress:40 or less (MPa)
Working temperature:70 ℃)
Summary:
throttling device, also known as differential pressure flowmeter, Orifice flowmeter contains (integrated orifice flow meter, standard orifice, annular orifice flow meter, integrated annular orifice flow meter)
Ring chamber orifice meter can be divided according to function name gas flow meter, flue gas meter, steam flow meter, gas flow meter, compressed air flow meter, liquid flow meter.
LWG type series annular orifice meter is SIKE measurement and control technology co., LTD., henan overview on the research and development on the basis of the standard orifice throttling flow sensor, because it USES annular single structure, make measurements in all kinds of dirt medium through the orifice plate with a circular seam between pipe can easily pass. So the circular orifice flowmeter is widely applied in the dirt medium flow measurement. Circular orifice itself comes with a measuring tube. In central measuring tube fixed a concentric circular plate - flow plate, the plate of the bearing steel in the mouth (10) and take pressure staggered, so bearing steel downstream of the flow of the fluid resistance is negligible, and the upstream flow plate without any block, can make the upstream velocity distribution axisymmetric completely, is advantageous to the geometric similarity and dynamic similarity, improve the accuracy of measurement. Circular orifice meteris suitable for various fluid (gas, steam, liquid medium, such as: saturated steam and superheated steam, compressed air, all kinds of exhaust gas, burning furnace, cooling water, heavy oil, residual oil, fuel oil, condensate, all kinds of corrosive chemical solution, etc.
Features:
1, not only can measure the general fluid flow, and can also be applied to contain various impurities such as dust, suspension, precipitation, etc.) of the fluid, such as a variety of hot gas, flue gas, natural gas, cooling circulating water, etc.
2, measuring saturated steam superheat steam can avoid stop steam condensate accumulation formation, when steam again to send, can quickly into the accurate measurement.
3, instrument ontology has a straight measuring tube, on-site installation, the installation error (such as eccentric, sealing gasket into pipe) has no effect on meter almost.
4, adopts "equalizing ring structure, when the straight pipe length is not long enough, can still be accurately measured. For example: in a 90 ° bend downstream, before the table has a length of 2 d; In a 30 ° elbow downstream, there is 0.5 D length can be in front of the table.
5, connected by "welding method", it is suitable for high temperature and high pressure fluid (e.g., superheated steam), low cost, reliable operation, stable performance.
6, adopts "jacket insulation structure, suitable for easy crystallization and easy vaporization require heating or cooling fluid (such as ammonia, some chemical products, etc.).
LWG type ring chamber orifice meter, the flow area is the center of the plate of circular hole, when the fluid through the round hole because of the sudden contraction flow speed for measuring flow, and the ring chamber orifice meter, the flow area is the outside part of the plate and the inner wall of the tube forming ring, fluid through because of the circulation area of the sudden contraction of acceleration, the fluid around the edges of the ring chamber orifice plate boundary layer is cylindrical, which occurs when the fluid resistance on the similar principle, so the ring chamber orifice meter so close to a fluid resistance coefficient, which makes the two possible with similar coefficient of outflow.
The main technical parameters:
Pressure from bring ways: standard pressure
Bring about nominal pressure (MPa) : 40 or less
Bring about nominal diameter (mm) : (- DN2600
Bring about accuracy (plus or minus 1.5% to plus or minus 2.5% uncertainty (calibration) sampling (demanding higher precision, solid flow calibration can be up to + / - 1.0%)
在线联系供应商
Other supplier products
| Venturi tube | Venturi tube Product name:venturi tube Product code:16311-252 Update time:2015.08.25 Views:913 Processing custom origin:in kaifeng Venturi tu... | |
| Top mounted magnetic float liquidometer | Top mounted magnetic float liquidometer Product name:high temperature and high pressure type magnetic flap level gauge Product code:15644-178 Up... | |
| magnetic float level gauge plant | Double cavity magnetic flap liquid level gauge side mounted magnetic float level gauge magnetic float level gauge plant Product name:double cavi... | |
| magnetic float level gauge plant | Magnetic level gauge magnetic float level gauge plant top mounted magnetic float level gauge Product name:standard cavity magnetic flap liquid l... | |
| magnetic float level gauge | Stainless steel magnetic float liquidometer magnetic float level gauge magnetic float level gauge plant Product name:Stainless steel magnetic fl... |
Same products
| Optical Brightener OB-1 (OBA 393) | 卖方: Jinan Ogilvy Chemical Co., Ltd | Chemical Name: 2-[(Ethylsulfanyl)methyl]phenyl methylcarbamateC.I.: 393CAS: 1533-45-5Molucular Fo... | |
| PH-A63防水笔式PH/EC/温度三合一测试仪 | 卖方: 科立龙电子股份有限公司 | 特点 基于微处理器的快速准确显示-新的坚固耐用的人体工程学设计-外观时尚,携带方便 大屏幕背光,清晰显示,同时显示温度带自动温度补偿 主机防水等级IP65 电池电量缺电指示 自动关机;使用... | |
| PH-A6防水笔式高精度酸碱度/ 温度计 | 卖方: 科立龙电子股份有限公司 | 特点 基于微处理器的快速准确显示-新的坚固耐用的人体工程学设计-外观时尚,携带方便 大屏幕背光,清晰显示,同时显示温度带自动温度补偿 主机防水等级IP65 电池电量缺电指示 自动关机;使用... | |
| PH-A8防水笔式土壤PH计 | 卖方: 科立龙电子股份有限公司 | 大屏幕背光,清晰显示,同时显示温度带自动温度补偿 主机防水等级IP65 两点按键校准,自动识别pH标准缓冲液;自动电源关闭,有效节省电池能耗。 两节七号大容量供电。适用于土壤、面团等。 ... | |
| TH021W 物联网温湿度控制器 | 卖方: 科立龙电子股份有限公司 | 产品说明: 本电子温控器可用于仓储、宠物、养殖、栽培等各种温湿度控制场合,比如给温室、冬季花园加温或降温,以及水族馆水温监控、育种土壤的温控。操作简便,可与任何电热垫或其它加热或冷却设备连... |













