Wire Cut - through Tester for Ford Automotive Wires
Applicable Standard:
Engineering Specification - Ford Global Wire specification, PART NO. ES - AU5T - 1A348 - AA
Technical Parameters:
1. Sensing method: High - precision load cell (sensor) 2. Capacity: 200KG 3. Cut - through speed: 10mm/min 4. Effective measurement range (%): 0.5 - 100 5. Accuracy class: Grade 1 6. Load accuracy: Within ±1% of the indicated value 7. Display: Controlled and recorded by computer software 8. Equipped with an automatic stop function upon cut - through 9. Overload protection: The machine will automatically activate protection when the load exceeds the maximum by 10% 10. Power system: AC servo motor 11. Fixture configuration: One set of fixtures selected according to the user's product requirements 12. Power supply: AC 220V±10%, 50HZ, 5A 13. Dimensions: 56X80X170cm 14. Diameter of the cut - through steel wire: 0.45mm 15. Cut - through test voltage: Less than 24V
在线联系供应商
Other supplier products
 |
Wyzenbeek Abrasion Tester | Applications Oscillator Abrasion Testeris also named asWyzenbeek Abrasion Tester, used to determine the abrasion resistance of fabrics when rubbed... |
 |
Safety Helmets Wearing Stability Tester | Standard GB 811-2022: Safety Helmets – General Technical Requirements GB 24429-2009: Sports Helmets – Requirements and Test Methods ... |
 |
Sanitary napkin absorption speed tester | Main uses: The absorption speed tester is used to measure the absorption speed of sanitary napkins, menstrual napkins, diapers, etc., reflecting w... |
 |
Thrust Washer Tribological Performance Tester | Applicable standards When the end face rotary friction and wear testing machine is tested, it is usually necessary to follow certain standards and... |
 |
Vertical Tray Fire Test Apparatus/UL1685/IEEE 1202 | This tester is based on IEEE1202 and IEEE 383 standard design and development. This tester is used to assess single or bunched cables under defined... |
Same products
 |
Plastic Smoke Density Tester F313 | 卖方: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
WYLIE WL-155 SIM Card Tester for iPhone 14-17 Pro Max & Android | 卖方: China PHONEFIX Technology Co., Ltd | WYLIE WL-155 SIM卡测试仪用于检测SIM卡电路，支持iPhone 14/15/16/17 Pro Max和安卓手机的双SIM卡检测。配备LED数字显示屏，支持Type-C充电，即插... |
 |
HCV1500高精度电压传感器 | 卖方: Shenzhen Hangzhi Precision Electronics Co., Ltd | HCV1500高精度电压传感器是一种能够在原边和副边完全隔离的条件下测量直流、交流、脉冲及各种不规则波形的电压传感器。它主要用于对精度要求较高的测量验证和校准领域，以及对灵敏度、稳定性、可靠性要... |
 |
Xenon Test Chamber | 卖方: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | 卖方: 上海千实精密仪器 | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
