Geosynthetics Bursting Strength Tester
Scope of application:
It is used to determine the bursting strength of geotextiles, geomembranes and geocomposite materials composed of geotextiles and geomembranes. The specimen is clamped on the elastic diaphragm, the liquid pressure is applied under the diaphragm to expand the diaphragm and the specimen, and the liquid volume is increased at a constant speed until the specimen is broken, and the bursting strength and bursting degree are measured at this time. In the absence of a sample, the burst strength of the expanded film is measured when it reaches the burst height with a sample, and the difference between the two is the burst strength of the sample.
Meet the standard:
ASTM D3786-2008,SL/T ,etc
Instrument features:
Meet a variety of standard requirements of the sample and area, wide range of application;
User-friendly operation interface, touch screen control, digital display, simple and easy to operate;
Supporting professional test system to realize the simultaneous measurement of force value, displacement and time during burst;
Select high-precision sensor, the result is accurate and reliable;
Equipped with professional sample fixture, sample loading is labor-saving, convenient and reliable;
The front of the panel is equipped with an emergency stop button, easy to operate, safe and reliable;
Built-in thermal printer, timely output test results.
Technical parameters:
The test area is 7.3cm2
Pressure rate 10——150ml/min
Tensile strength measurement range and accuracy 0——6000kPa,+1%
Strength fraction 0.1kPa
Maximum bursting height and resolution 35mm,±0.1mm
Power supply AC 220V 50Hz
Overall dimensions 550x400x600mm
Standard configuration:
1. One host
2. One power cable
3. 25 pieces of rubber diaphragm
4. Glycerin 500ml
5. 2 rolls of thermal printing paper
6. 1 wrench
7. Four feet
8. Product packing list 1 copy
9. 1 copy of product manual
10. One copy of product certificate
在线联系供应商
Other supplier products
 |
Glow wire tester | F242 Glow-wire tester, By simulating the thermal stress caused by heat source or ignition source such as hot component or overload resistor in a sh... |
 |
Helmets Designated Protection Areas Tester | Main Purposes 1. Used to mark test points and test lines on helmets. 2. Used for line - marking according to different test standards. 3. Used t... |
 |
Resistance of Materials to Molten Metal Splash | Description: The tester is according to the ISO 9185-2007.This International Standard specifies a method for assessing the heat penetration resist... |
 |
Rotary Rubbing Color Fastness Tester (Crockmeter) | Standard AATCC 116: Colorfastness to Crocking (American Association of Textile Chemists and Colorists) ISO 105-X16: Colorfastness to Rubbing (I... |
 |
Rapid Crack Propagation Tester | Standard ISO 13477: Designed exclusively for determining critical pressure (Pc) and temperature (Tc) in polyethylene pressure pipes during rapid... |
Same products
 |
PHS‑25C Benchtop Digital pH Meter | 卖方: 科立龙电子股份有限公司ctron Co.Ltd | Product Description: Equipped with BNC‑composite electrodes and power supplies adapt... |
 |
PHS‑3C Automatic Calibration pH/Thermometer | 卖方: 科立龙电子股份有限公司ctron Co.Ltd | Product Description: Equipped with BNC‑compatible combination electrodes and power s... |
 |
KL‑016 Benchtop Digital pH Meter (Backlit Display) | 卖方: 科立龙电子股份有限公司ctron Co.Ltd | Product Description: This instrument features a large‑screen digital display, extern... |
 |
KL‑98 Professional Laboratory pH/ORP/Temperature Meter | 卖方: 科立龙电子股份有限公司ctron Co.Ltd | Product Description: The PH‑98 Tester is an easy‑to‑operate, multi‑functional microp... |
 |
KL‑03(I) Pen‑type High‑precision pH Meter | 卖方: 科立龙电子股份有限公司ctron Co.Ltd | Product Description: This instrument is available in a variety of colors. Calibratio... |
