.

Geomembrane Environmental Stress Cracking Resistance Tester

Scope of application:

The stress cracking strength of polyolefin geomembrane was measured and evaluated by notch constant load tensile test. During the test, the dumbbell sample with notch prepared in advance is placed in the thermostatic surfactant under constant load tension, and the fracture time of the sample is measured and recorded. A series of test results under different stress levels can establish a relationship between the stress level and the fracture time on the logarithmic axis.

Meet the standard:

GB/T 17643- Appendix D-2011,ASTM D5397-1999,CJ/T 234- Appendix C-2006,etc.

Technical parameters:

Maximum tensile stress 20MPa

Number of stations 30 can be customized

Water bath temperature range RT——90°C

Temperature control accuracy ±1 ° C

Switch sensitivity 200g

Timing accuracy 1s

Sample thickness 0.75——3mm

Notch depth 20% of the nominal thickness of the sample 6

Power supply AC 380V 50HZ

Overall dimensions 1420x640x1900mm

Weight 380kg


在线联系供应商

至: 上海千实精密仪器
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Vehicle Cabin Air Filter Test device
Vehicle Cabin Air Filter Test device Applicable standards DIN 71460-1 Road vehicles - Air filters for passenger compartments of motor vehicles - Part 1: particulate matter filtration ...
Battery impact tester
Battery impact tester  The test sample cell is placed on a flat surface with a 15.8±0.2mm(5/8 in) diameter rod placed in a cross position over the center of the ...
Minimum Ignition Energy  Dust Cloud Tester
Minimum Ignition Energy Dust Cloud Tester Description: Dust Cloud Minimum Ignition Energy Tester disperses a certain mass of dust specimen to be tested into the Hartmann tube device throug...
Residual Ethylene Oxide Gas Chromatograph
Residual Ethylene Oxide Gas Chromatograph The ethylene oxide residual gas chromatograph is a professional analytical instrument for detecting the residual amount of ethylene oxide in medica...
Spinal Internal Fixation System Component Testing Machine
Spinal Internal Fixation System Component Testing Machine Standard YY/T 0119-2014 (China): Specifies mechanical testing protocols for spinal fixation components, including screws, plates, rods, and connec...
供应产品

Same products

Reliable Components for Water and Industrial Systems
Reliable Components for Water and Industrial Systems 卖方: 866507 The Stainless Steel Float Ball is designed for automatic liquid level control and fluid managem...
Double Convex Lenses
Double Convex Lenses 卖方: Shandong Yanggu Constant Crystal Optics, Inc Double Convex Lensesare used in image relay applications, or for imaging objects at close conjuga...
Wedge Prism
Wedge Prism 卖方: Shandong Yanggu Constant Crystal Optics, Inc Wedge prismis an optical element with plane-inclined surfaces, usually the faces are inclined tow...
Ball Lenses
Ball Lenses 卖方: Shandong Yanggu Constant Crystal Optics, Inc Ball Lensesare commonly used to improve signal quality in fiber coupling applications, or for use...
KAZUKI 6-GFM-33 12V33Ah AGM Gel Battery
KAZUKI 6-GFM-33 12V33Ah AGM Gel Battery 卖方: Xin Tang Shallow Power Supply Co.,LTD KAZUKI 6-GFM-33 12V33Ah AGM Gel Battery Small Office & Retail UPS Backup Power Systems...