Thimble Eyenuts
1.Technical Parameters and DrawingsHE CodeWt.kgENT5/80.354Notes:1.Tolerance: ±5%2.Producing standard: ANSI C 135.5 3.All dimensions are in MM except for marked. 4.Finish: hot dip galvanized per ASTM A153 5.Customized sizes are available at request.2.Product Description:Thimble eye nuts are produced to tie to through bolts or threaded end of thimbleye bolts for straight-away head guys, manufactured for high strength applications.Eye nuts are suitable for diameter 5/8" rods or bolts. The material is drop-forged galvanized steel.Diameter 3/4" and 1" share the same dates.The above are typical only, please consult Shanghai Herrajes for further information.3.Product Details:Name: thimble eyenuts, thimble eye nuts, single eyenuts, thimble eyes, single eye nutsHS code: 7326Model: ANSI C 135.5Package: bulk packing; palletized; as requiredTrademark: HE, as requiredOrigin: ChinaRaw material: carbon steel SAE 1020, ductile iron Finish: hot dip galvanizedODM&OEM service: yesSample: available, FOCPayment term: T/T, 30% prepayment and 70% balance against B/LCertificate: ISODelivery time: 20-40 daysMOQ: 500kgsExport term: FOB; CIFProduction capacity pcs/day: 2000 Minimum tensile strength lbs.: 7800Eye type: thimbleFor bolt dia. in: 5/8, 3/4, 1,etc.Weight per each kg: 0.354
Other supplier products
|
|
|
1.Technical Parameters and DrawingsHE CodeCCP-011. Tolerance: ±5% 2. All dimensions are in MM3. Material: carbon steel 4. Finish: hot dip galvani... |
|
|
|
1.Technical Parameters and DrawingsHE CodeDimensions(mm)Wt.Rated failure loadD1D2ALΦR1ΦR2(kg)(kN)YPL.43100YPL.66120YPL.8160YPL.9200YPLYPL.8200YPLYP... |
|
|
|
1.Technical Parameters and DrawingsHE CodeDimensions(mm)Designated size of couplingRated failure loadWt.ABCDΦR(KN)(kg)QP-7501633.3172016700.3QP-105... |
|
|
|
1.Technical Parameters and DrawingsHE CodeDimensionsDia. ΦDWt. kgABCEEBO1/2-88" (203.2)4" (101.6)1"(25.4)1 1/2" (38.1)1/2"(12.7)0.35EBO1/2-1212"(3... |
|
|
|
1.Technical Parameters and DrawingsHE CodeDescriptionWt./1000kgGWT3/8Guy wire thimble 3/8"37.2Notes:1. Tolerance: ±5% 2. All dimensions are in MM ... |
供应产品
Same products
