GD-6536C Low-temperature Distillation Apparatus
Summary
The instrument is designed and made as per standardsGB/T6536 Test Method for Distillation Characteristics of Petroleum ProductsandASTM D86 Standard Test Method of Distillation for Petroleum Products at Atmospheric Pressure.It is suitable to determine the distillation characteristics of gasoline, aviation gasoline, jet fuels, special boiling point solvent, naphtha, diesel oil, distillate and similar petroleum products.
I. Main technical features
1.The electrics parts are controlled by controlling case.
2.The controlling case is made of cold rolled steel. It has an observation window and a built-in furnace. The electric part is at the lower section of the controlling case.
3.The furnace part is composed of SiC furnace base, heater of 1000W/220V, and SiC plate. The position of furnace can be adjusted by rotating the up and down knob on the controlling case, so that you can adjust the relative position of distillation flask and the opening of condensation tube. The heating power can be adjusted by rotating the voltage adjusting knob.
4.The refrigeration bath is made of stainless steel. It contains heating device, refrigeration device, temperature measuring device and stirring device. The stirring device is driven by a motor.
5.The dimension of condensation tube complies with GB/T6536.
II. Main technical specifications
1.Power supply: AC 220 V±10%, 50 Hz
2.Heating power: 1000 W
3.Receiving cylinder: 100 ml. Scale division 1 ml.
4.Distillation flask: 125 ml, as per GB/T6536 and ASTM D86.
5.Thermometer: Total immersion. They are from -2 to 300 ℃ and from -2 to 400 ℃. The scale divisions of them are 1 ℃.
6.Flask support board: SiC. Diameters of holes are φ32mm, 38mm, and 50mm.
7.Temperature controller:
(1) Range: 0 ℃ to 60 ℃;
(2) Temperature accuracy: ±0.5℃
(3) Temperature display mode: Digitally displayed by LED
8.Ambient temperature: ≤30℃
9.Relative humidity: ≤85%
10.Refrigerated compressor: New-type refrigeration compressor
11.Maximum power consumption: 2500 W
在线联系供应商
Other supplier products
 |
GD-0709A Mashall Stability Tester | Summary This instrument is designed and made as per industrial standardT0709-2011 in TG E20-2011 Specification and Test Methods of Bitumen and Bit... |
 |
GD-265C Kinematic Viscometer | Summary This instrument is designed and made as per the industrial standard of People’s Republic of ChinaSY/T5651 Technical Condition of Petr... |
 |
GDVA-402 CT PT Testing Equipment | GDVA-402 CT/PT TesterI Brief IntroductionGDVA-402CT/PT tester is a specialtester for testing characteristic of CT and PT. TheTester can finish CT/... |
 |
ASTM D445 Automatic Kinematic Viscosity Apparatus for Petroleum Products | Introduction: » GD-265H ASTM D445 Automatic Kinematic Viscosity Apparatusis designed and made as per the industry standard of People’... |
 |
GD-0623 Saybolt Viscometer | Summary The instrument is designed and made as per T 0623 Bitumen Saybolt Viscosity Test (Saybolt Viscometer Method) in the JTJ052 Standard Test Me... |
Same products
 |
Plastic Smoke Density Tester F313 | 卖方: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | 卖方: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | 卖方: 上海千实精密仪器 | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | 卖方: 上海千实精密仪器 | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | 卖方: 上海千实精密仪器 | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
