.

Oscillator and Wyzenbeek Abrasion Tester complies with ASTM D4157


Oscillator and Wyzenbeek Abrasion Tester complies with ASTM D4157 is also named as Wyzenbeek Abrasion Tester, used to determine the abrasion resistance of fabrics when rubbed against a standard abradant or a wire mesh screen in a backward and forward motion over a curved surface. Particularly it’s suitable for abrasion resistance of fabrics used in the automotive and furniture industry. The instrument follows the U.S. standard with four friction heads and electronic counters to control the operating cycle.

Standard
ASTM D4157:Standard Test Method for Wear Resistance of Textiles (Swing Roller Method)


Work Principle
The long strip sample fabric is mounted on the front and rear fixtures of the friction head with a certain tensioning force applied.The friction medium is installed on the circular grinding platform. Make the sample contact with the friction medium and apply a certain load on the sample.The friction platform moves forward and backward to abrade the sample.After a certain number of friction, assess the change of sample's fracture strength.

Features
1. Modern efficacy design.
2. The suction device is connected to an auxiliary vacuum cleaner.
3. Sealed gear actuator ensures quiet operation.

Technical Parameters
Test number 4
Abrasion table Cambered surface -R100mm,Length-400mm
Test stroke 76±2 mm
Abrasion velocity 90±1 /min(double friction)
Tension adjusting weights 340g (The force applied to the sample can be adjusted from 4.45 to 26.7 N)
Load weight 150g (adjusted from 4.45 to 15.575N)
Tension of sample 17.8N(adjustable)
Sample loading 13.4N(adjustable)
Sponge rubber pressure pad 50×50mm(±1mm)
Instrument material Stainless steel
Surface treatment Paint spraying
Sample size 245×73 mm
Dimension 50L× 50W × 60H cm
Weight 75kg
Power supply 220V,50Hz,0.05A

Accessories and Consumables:
Rubber pad (8 / bag)
Metal mesh - Wyzenbeek (4 / bags)
Standard abradiant #10 cotton canvas - 60 inch x 5 yards
Fine sandpaper for cleaning rubber pad
Nylon brush, soft fur



在线联系供应商

至: 千实精密机电仪器检测设备有限公司
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Fabric Thickness Gauge instrument
Fabric Thickness Gauge instrument ISO 5084 Digital Fabric Thickness Gauge instrument is used to measure the thickness of textiles, knitwear and film, rubber, foam, etc. Besides, it ...
 martindale abrasion and pilling tester for fabric textile
martindale abrasion and pilling tester for fabric textile Martindale Abrasion Tester, to determine the abrasion and pilling resistance of all kinds of textile structures. Martindale Test Equipment complies...
Digital Elmendorf Tearing Tester
Digital Elmendorf Tearing Tester
astm d3786 hydraulic bursting strength tester
astm d3786 hydraulic bursting strength tester Digital bursting strength tester is used for the detection of woven, knitted, non-woven fabrics, paper or board about the bursting strength and hei...
Multi Finger Scratch/Mar Tester
Multi Finger Scratch/Mar Tester Introduction: Multi Finger Scratch/Mar Tester uses tungsten carbide as a scratch to accurately detect surface damage caused by unconventiona...
供应产品

Same products

BS EN 12600 双轮胎冲击体
BS EN 12600 双轮胎冲击体 卖方: 秦皇岛源辰科技设备有限公司 参考标准: BS EN 12600:2002建筑用玻璃。摆锤试验。平板玻璃的冲击试验方法和分类 技术数据: 1)充气轮胎冲击器: 重量:50kg±0.1 kg 胎压:0.35Mp...
Pct高压高低温试验箱
Pct高压高低温试验箱 卖方: 广东艾思荔检测仪器有限公司 HAST PCT高低温耐压试验箱广泛应用于多层线路板、IC封装、液晶屏、LED、半导体、磁性材料、钕铁硼、稀土、磁铁等产品的密封性测试,可测试上述产品的耐压性和气密性。
工业用可编程加速老化测试仪
工业用可编程加速老化测试仪 卖方: 广东艾思荔检测仪器有限公司 HAST(高加速应力测试)是一种用于评估电子元件和其他材料在高温和高湿条件下的可靠性的测试。HAST测试箱是一种设备,它提供了受控的高温和湿度条件,以模拟老化和降解对材料的影响,比正常使用的时间...
CE认证实验室设备运输振动测试仪Un38.3标准
CE认证实验室设备运输振动测试仪Un38.3标准 卖方: 广东艾思荔检测仪器有限公司 CE认证实验室设备运输振动测试仪适用于玩具、电子产品、家具、礼品、陶瓷、设备等包装的耐振动测试。,在模拟运输条件下,根据美国和欧盟运输标准(ASTM,ISTA)
大型模拟运输振动测试仪
大型模拟运输振动测试仪 卖方: 广东艾思荔检测仪器有限公司 本机适用于各种包装材料、PC板、电器产品等的运输间损伤模拟试验。