Dry Wet rubbing fastness Tester
Testing Standards:ASTM F1319, AATCC 8/165, BS 1006 D02, GB/T 3920, ISO 105 D02/X12, JIS L0849, M&S C8/C8A, NEXT TM6
Applications:
Electronic Crockmeter/Rubbing Fastness Testeris used to determine the colour fastness of cotton, chemical fiber, blended, other coloured fabrics and leather to dry or wet rubbing, suitable for frequent use and long run tests. A piece of dyed test cloth and a piece of white cotton cloth are rubbed against each other though the tester in a specific pressure and stroke.
The color fastness of the sample is graded by comparing the coloring of the white cotton with the gray scale. Fitted with digital electronic preset-tablecounter for strokes.
Product Information and Features:
Electronic Crockmeter is used to determine colour fastness of materials to wet and dry rubbing, suitable for frequent use and long run tests.
A.Diameter of friction head:16mm or 25mm;
B.The weight to produce a loading of 9N；
C.Electric drive, working voltage of 220V;
D.Equipped with electronic counter, could completely simulate the results of manual friction for 10 times, with high reproducibility;
E.The fixed device for the standard crocking cloth;
F.A steel spring clip for rapidly fastening samples;
G.Control mode consists of AATCC, ISO standards, and customized setting;
H.Automatic alarm to remind the test over.
Accessories and Consumables:
1.The Crocking Cloth Clamps;
2.Standard Emery Paper For Crockmeter;
3.Pre-cut White Crocking Cloths for AATCC/ISO;
4.Pre-cut White Crocking Cloths for SDC;
5.Crockmeter Calibration Fabric;
6.Grey Scale (Staining) ISO/BS Standards;
7.Grey Scale (Staining) AATCC Standards.
Other supplier products
|
|
textile fabric thickness tester |
digital fabric thickness tester is designed to accommodate testing to ASTM D1777, option 1, with pressure foot of 1.129” diameter under a loa... |
|
|
Fabric Thickness Gauge |
Fabric Thickness Gauge
Testing Standards:
JIS L1096/L1018, GB/T 3820, ISO 5084
Applications:
Fabric Thickness Gaugeis an apparatus to measure the t... |
|
|
Low Temperature Chrysler Fold Tester |
Cold Fold Tester ---Chrysler
Standards:LP-463-KB-28-01 Method A
Applications:
This Cold Fold Tester is applied to the cold fold test based on Chrys... |
|
|
JIS L Rubbing Colour Fastness Test machine conform to JIS L0849 |
The rubbing color fastness tester is a standard testing machine of the Type II rubbing tester (GAKUSIN TYPE) specified in JIS L0849 Test Method of ... |
|
|
fabric textile martindale abrasion and pilling tester |
Testing Standards:
ASTM D4970, ISO 12945.2, GB/T 4802.2/13775/21196.1/21196.2, ASTM D4966, ISO 12947, FZ/T 20020, BS 3424-24/5690, ISO 12947.1/129... |
供应产品
Same products
