Leather Vamp Flexing Extensibility Testing Machine
Introduction:
Vamp Flexing Tester is used to determine the propensity for materials to crack or otherwise fail at flexing creases, but can also be used to assess whether leathers are likely to produce salt spue. In particular the test simulates conditions in the vamp part of footwear during walking. The test can be conducted with either wet or dry specimens at room temperature. The method is applicable to all flexible materials and in particular those used to manufacture outers and linings of footwear uppers such as leathers, coated fabrics and textiles.
Principle:
A square specimen of the material is folded over two inverted V-shaped clamps. The clamps are able to move relative to one another so that as they become closer the specimen is flexed to produce one downward crease surrounded by four upward creases. During the test the clamps oscillate at a constant speed so that the specimen is repeatedly flexed. After a predetermined number of cycles the test is stopped and the specimen is visually examined for signs of damage or salt square.
How are Flexibility of shoe vamps measured?
ISO5423 shoe upper leather stretching and bending testing machine, this machine simulates the shoes in the process of walking, the different parts of the shoe upper leather will be subjected to forces such as stretching, squeezing, bending, etc., resulting in scratches, wrinkles or damage to the shoe material. The machine is simulating this test as a reference for the quality improvement or purchase of upper materials, and it has a power-off memory function.
Standards:
EN ISO 20344-2004 Section 6.5.2
EN ISO 22288
ISO 5423 section 5.2
SATRA TM25
GB/T 20991 Section 6.5.2
GB/T 20991 Section 6.5.2
AS/NZS 2210.2 Section 6.5.2
Parameter:
Stretching distance：(19±0.5) mm
Scaling speed：(300±30) CPM
Specimen size：(64×64) mm
Number of samples：12pcs
Fixture：40°V v-shape6.4mm (R)
Counter：6-digit LCD digital display
Power supply：1 Φ, AC 220 v, 2 a
Volume：approx. (55x35x30) cm
Weight：approx. 60kg
在线联系供应商
Other supplier products
 |
Hydrostatic Head Tester | Hydrostatic Head Tester - Textile and Apparel - standardStandards: GB/T 4744, AATCC 127, ERT 120-1/160-0, BS EN20811/3321/3424, AFNOR G07-057, I... |
 |
BBA steady state solar simulator tester | Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval IEC 61646: Thin-Film Terrestrial Photo... |
 |
Oxidizing liquid time pressure tester/ | Product Description： Conforms to UN Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria 11.6.1 Test 1(c)(i): Time... |
 |
Electronic crockmeter | Introduction AATCC rubbing color fastness tester is the official test equipment of the United States Textile Chemists Association and printing and... |
 |
Mask Filter Efficiency Tester | Standards: EN 143 Protection device, particle filter requirement, test, mark EN 149 Respiratory protection device, microparticle filter with hal... |
Same products
 |
Plastic Smoke Density Tester F313 | 卖方: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | 卖方: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | 卖方: 上海千实精密仪器 | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | 卖方: 上海千实精密仪器 | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | 卖方: 上海千实精密仪器 | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
