.

Minimum Ignition Energy (MIE) – Dust Cloud Tester

Description:

Dust Cloud Minimum Ignition Energy Tester disperses a certain mass of dust specimen to be tested into the Hartmann tube device through a certain pressure of compressed air to form a cloud of dust, uses a specified spark energy to ignite the dust cloud, and obtains the minimum ignition energy of the dust specimen to be tested through a series of tests. It reflects the sensitivity of dust ignition from the energy point of view, and is suitable for evaluating the potential explosive hazard of dust clouds.

Reference Standards:

ASTM E2019

IEC 61241 - 2 - 3

ISO/IEC 80079 - 20 - 2

GB/T 16428

Product Features:

1. It has built - in commonly used international test standards, allowing for testing according to standard parameters or custom - setting.

2. During testing, only the ignition energy value needs to be input, and the instrument automatically selects the optimal combination of capacitance and voltage.

3. The high - voltage charging module automatically disconnects, improving operational safety.

4. The powder dispersion device is reasonably designed to ensure uniform dispersion of powder samples.

5. The instrument is flexible to use, with easy adjustment of the electrode spacing, spraying pressure, and delay time.

6. It automatically records the number of times the electrode ignites and reminds users to replace the electrodes in a timely manner to prevent electrode wear from affecting the test results.

7. The Hartmann tube is equipped with a lifting and rotating mechanism, which is convenient for cleaning and saves experimental time.

8. Remote ignition ensures the safety of experimenters.

9. User - level management enables the management and control of accounts at different levels.

10. The USB interface is plug - and - play, facilitating data management.

11. With professional industrial design, it is simple and elegant.

12. It has a user - friendly human - machine interaction, making it easy to learn, understand, and operate.

13. It is equipped with a 7 - inch color liquid - crystal touch screen that dynamically displays the experimental progress.

Technical parameters:

Operating Environment

(545)℃, <85%RH

General Purpose Mode

1 mJ,3 mJ,10 mJ

Spark Energy

30 mJ,100 mJ,300 mJ,1000 mJ,3000mJ

Custom Mode

(13000)mJ, settable, step 1mJ

Spark Energy

(015)kV

Charging Voltage

No load, 1mH inductive load

Discharge Load

1.2L Hartmann Tube

Experiment Vessel

Diameter 2mm Tungsten Electrode

Electrodes

(210)mm, Adjustable

Electrode Spacing

High Voltage relay triggered,... Moving electrode trigger

Electrode Trigger Mode

20ms180ms, adjustable

Ignition Delay Time

0.4MPa0.7MPa, adjustable

Powder Spray Pressure

USB*2

Interfaces

90260VAC/4763Hz

Power

300W


在线联系供应商

至: Standard International Group (HK) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Photovoltaic module insulation resistance tester
Photovoltaic module insulation resistance tester The Photovoltaic Module Insulation Resistance Tester is a precision instrument designed for simultaneous measurement of insulation resistance and l...
Electric pencil hardness tester
Electric pencil hardness tester The Electric Pencil Hardness Tester is designed to determine the surface hardness of coating layers applied to finished products by means of a stan...
Fiber Blend Ratio Tester
Fiber Blend Ratio Tester The Fiber Blend Ratio Tester is designed to measure the electrical resistance of a compacted fiber sample and convert it into the specific resistan...
Water Leak Detector
Water Leak Detector Product Description GB/T 21619-2008 Test Methods for Dangerous Goods Flammable Solids Emitting Flammable Gases in Contact with Water, GB 19521.4-2...
Cleveland Open Cup Flash Point Tester
Cleveland Open Cup Flash Point Tester The instrument can automatically test the flash point and ignition point of petroleum products (the ignition point of oil exceeding 80 ° C, exc...
供应产品

Same products

Plastic Smoke Density Tester F313
Plastic Smoke Density Tester F313 卖方: Standard International Group (HK) Limited The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
Xenon Test Chamber
Xenon Test Chamber 卖方: Standard International Group (HK) Limited Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
Single Cable Vertical Flame Tester
Single Cable Vertical Flame Tester 卖方: 上海千实精密仪器 Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
Safety Helmet Flammability Tester
Safety Helmet Flammability Tester 卖方: 上海千实精密仪器 Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
Furniture flammability tester
Furniture flammability tester 卖方: 上海千实精密仪器 Product details Furniture flammability tester is mainly used to test the combustion performance ...