Carpet Static Load Tester
Instrument Description
When furniture is moved, imprints are often left at the position of its feet. These imprints will disappear only when the carpet recovers to its original thickness. This instrument provides a convenient and reliable method to imitate such imprints and test the recovery of carpets after being compressed. This instrument applies a heavy load to the sample within a specified time, usually a pressure of 7 kg/cm² for 24 hours, with a stressed area of 6.0 cm², making it easy to place the WIRA digital thickness gauge in the compressed area. This device complies with the requirements of BS 4939 *Determination of the reduction in thickness of carpets after long - term heavy static loading*. The experiment is applicable to all textile carpets with the same thickness and structure, and is also applicable when measuring areas with different thicknesses and structures separately.
Compliance Standards
BS 4939: 1987(1996), ISO3416: 1986 Wools of New Zealand test method 124 Part B
Instrument Features
Simulate the imprints caused by furniture
Meet international standard requirements
Combine the static load tester with the thickness gauge, saving a lot of testing time
Simple, compact and durable
Parameters
-
Static pressure: 7.0 kg/cm² (≈ 0.70 MPa)
-
Loading area: 6.0 cm² (Ø ≈ 27.6 mm circular foot)
-
Load accuracy: ±0.5 % F.S.
-
Dwell time: 1 min – 99 h 59 min (programmable; 24 h is standard)
-
Thickness measurement range: 0 – 50 mm
-
Thickness resolution: 0.01 mm
-
Recovery observation period: up to 24 h (programmable)
-
Frame: anodized aluminum and stainless steel
-
Loading foot: polished stainless steel, interchangeable weights
-
Test bed: 250 mm × 250 mm (accommodates standard carpet tiles)
-
Safety: transparent polycarbonate guard with interlock
-
Controller: 4.3-inch color touch-screen PLC
-
Data export: USB flash drive (CSV format)
-
Power supply: 220 V AC ±10 %, 50/60 Hz, 300 W
-
Dimensions: 450 W × 480 D × 650 H mm
-
Net weight: ≈ 45 kg
-
Operating temperature: 15 °C – 35 °C
-
Relative humidity: 20 % – 80 % RH, non-condensing
在线联系供应商
Other supplier products
 |
Minimum Ignition Energy (MIE) – Dust Cloud Tester | Description： Dust Cloud Minimum Ignition Energy Tester disperses a certain mass of dust specimen to be tested into the Hartmann tube device thro... |
 |
Fatigue Endurance Tester for Dental Implants | Standard ISO 14801:2016: Specifies dynamic fatigue testing protocols for endosseous dental implants, including load ratios, frequency, and failure... |
 |
Luggage rod reciprocating fatigue testing machine | Product Introduction: Luggage rod reciprocating testing machine for luggage rod reciprocating fatigue test. In the test, the specimen will be stret... |
 |
Thrust Bearing Rolling Friction and Wear Testing Machine | Applicable Standards: ASTM D3702 ASTM G99 ASTM G77 ISO 18535 Product Advantages: Simulates Real-World Conditions: Allows testing under cont... |
 |
Catheter Guidewire Friction Tester | Product introduction The guide wire friction tester is mainly used to measure the friction between the guide wire and the guide wire. This device ... |
Same products
 |
FH-77富氢测试笔 | 卖方: 科立龙电子股份有限公司 | 产品说明： 用于测量氢气水（富氢水）和氢气水发生器的溶解氢含量。 特征： 1、电极更换方便 智能、携带方便、操作方便、实用； 产品广泛应用于食品、环卫、地质勘探、冶金、地表水、 ... |
 |
Xenon Arc Weather Ometer | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ... |
 |
Xenotest | Light Fastness Tester Si220 (SunTest) | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ... |
 |
Ozone Aging Chamber | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum... |
 |
Plastic Smoke Density Tester F313 | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ... |
