Rupture strength tester

Standard

IEC 61730-2: Photovoltaic (PV) Module Safety Qualification – Requirements for Testing

UL 61730: Safety Standard for Photovoltaic Modules

CE Certification(Conformité Européenne)

Product Advantages

Ultra-Wide Pressure Range

250–5.600 kPa (36–812 psi): Tests glass, backsheets, and encapsulants from thin-film to dual-glass modules.

0.01 kg/cm² Resolution: Captures micro-fractures before catastrophic failure.

Precision Engineering

5 kg/cm² Adjustable Holding Pressure: Simulates wind/snow loads per IEC 61730-2.

Multi-Unit Display: Switches between kPa, psi, and kg/cm² for global compliance.

Safety First

Dual Overpressure Protection: Mechanical relief valve + electronic cutoff at 5.600 kPa.

Explosion-Proof Chamber: Reinforced acrylic window for safe failure observation.

User-Centric Design

7” Touchscreen HMI: Preloaded IEC/UL test sequences with auto-hold functions.

Voice-Guided Setup: Step-by-step audio prompts for operators.

Data Integrity

Built-In Printer: Generates ISO 17025-compliant test certificates on-site.

SD Card Logging: Exports pressure-time curves for R&D analysis.

Product Features

Quick-Change Fixtures: Adapts to 2–20 mm module thicknesses.

Dynamic Pressure Control: Ramp rates from 1 kPa/s to 100 kPa/s.

Self-Calibrating System: Auto-tare and linearity checks before each test.

Rust-Resistant Frame: 304 stainless steel construction with epoxy coating.

Portable Design: 60 kg weight with integrated handles for lab-to-line mobility.

Accessories Included

Testing Kit:

1x Specialized Clamping Fixture (for 2–20 mm modules).

2x High-Temperature Rubber Membranes (300°C rated).

5x Aluminum Foil Calibration Discs.

Consumables:

1x 85% Glycerin Solution Bottle (for hydraulic calibration).

10x Disposable Dust Filters.

Documentation:

Multilingual Quick-Start Guide (printed + digital).

Compliance Certificates for IEC/UL Standards.

Safety Gear:

2x Safety Goggles (ANSI Z87.1 rated).

1x Emergency Pressure Release Key.

Technical Parameters

Parameter	Specification
Pressure Range	250–5.600 kPa (36–812 psi)
Resolution	0.01 kg/cm² (1.42 psi)
Holding Pressure	5 kg/cm² (71 psi) adjustable
Air Source	6 kg/cm² (87 psi) min (customer-provided)
Control Accuracy	±1% FS (full scale)
Power Supply	220V AC, 50/60Hz (single-phase)
Dimensions	560mm (W) × 470mm (D) × 550mm (H)
Weight	60 kg (net)

Other supplier products

	Electric pencil hardness tester	The Electric Pencil Hardness Tester is designed to determine the surface hardness of coating layers applied to finished products by means of a stan...
	Carpet hair removal measurement device	Standard ASTM D5417(Standard Test Method for Quantifying Loss of Fiber from Carpets) ISO 10362(Textile Floor Coverings - Determination of Fiber...
	Bubble Leak Tester	The Bubble Leak Tester utilizes a positive pressure testing principle and is suitable for the quantitative measurement of sealing strength, heat se...
	Rupture strength tester	The Rupture Strength Tester is designed to evaluate the mechanical pressure resistance and rupture strength of photovoltaic module components under...
	Rapid screening Calorimeter	Product Introduction： The rapid - screening calorimeter is a professional calorimetric instrument for the quick assessment of reaction thermal haz...

供应产品

Same products

	Xenon Test Chamber	卖方: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	卖方: 上海千实精密仪器	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	卖方: 上海千实精密仪器	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	卖方: 上海千实精密仪器	Product details Furniture flammability tester is mainly used to test the combustion performance ...
	Flame retardant testing machine	卖方: 上海千实精密仪器	Feature highlights: Flame Retardant Tester is designed for testing plastic runway surface layers...