Plastic Friction and Wear Tester

Product Description:

Plastic sliding friction wear tester consists of two main parts: the host machine and intelligent control system, which can be operated through the control system, and can display the value, torque, and time during the test process, display the current test value, and print out the test report of the standard requirements. This equipment is equipped with a water bath box, so that the specimen is completely in the water for friction and wear test, widely used in ships, warships, submarines, propellers, high polymer water lubrication bearing material friction and wear test, all-round simulation of the specimen materials and products in the actual use of the process of working conditions. Make the experimental process and data more real and reliable.

Standard:

GB3960-2016

Features:

1. motor: the use of high-precision speed motor, accurate control of the speed of the mechanism, to meet the requirements of experimental accuracy.

2. transmission system: the use of high-precision synchronous belt transmission, transmission efficiency of more than 98%, to ensure that the number of revolutions and torque on each friction ring is exactly the same, to further enhance the experimental accuracy of the product.

3、M-200B water bath box: the end face is made of acrylic material, the appearance is clean, beautiful and atmospheric. In the experimental process the experimenter can observe the specimen in the water to do the experiment scene, so that the whole process of the experiment as far as the eye can see. And when we need to not do experiments in the water when you can pull out the water bath box at the lower end of the sealing cover, let go of the water, which is the water bath box can also be used as a receiving box, to prevent experiments when the friction off the powder affects the environment of the equipment and test bench. Water bath box metal frame using SUS316/SUS316L stainless steel material to do the frame, so that the water bath box solid, reliable, durable and other advantages.

4、Sensor: The sensor accuracy of this instrument can reach 1% FS,

5、Lever system: The lever system in this equipment, using Archimedes' law of leverage formula for the design, in the processing of weights and levers of the density and size of a rigorous calculation, to ensure that the friction ring right above the force value is accurate.

6. end sealing system: this sealing system adopts fixed ring and moving ring sealing, fixed ring and moving ring sealing surface roughness is as high as 0.2. Through the spring on the moving ring on the fixed ring to achieve the sealing effect of the axial force, when the rotation speed is as high as 3.000r/min, there will be no leakage, fully meet the needs of the equipment.

Technical Parameters：

Sample size under test	30*7*6 (mm)
Rotation speed	200 rpm
Load	20KG (196N) ±1%
Friction ring size	φ40×10mm , chamfer 0.5×45°, deviation of concentricity between outer surface and inner circle is less than 0.01
Friction torque	0--4N-m
Friction ring material	Quenched 45-gauge steel, heat-treated HRC40-45. surface finish of outer circle
Velocity accuracy	1%
Friction torque accuracy	1%
Sensor measurement accuracy	1% FS
Load accuracy	0.5%
Counter accuracy	1S
Control method	microcomputer control
Instrument size (mm) Instrument weight (kg)	600*400*600
Sample size under test	80

Other supplier products

	ROSS zigzag tester	Product Introduction: The ROSS zigzag resistance tester installed the sole strip test piece on the ROSS zigzag test machine, so that the cut is di...
	Filter Membrane Pore Analysis Tester，ASTM F316 Compliant Pore Structure Tester	The Filter Membrane Pore Analysis Tester is a precision instrument designed to measure the pore size, distribution, and integrity of flat filter me...
	Bending Tester STD- FB2 - A	The Pure Bending Tester analyzes hand movements-referred to as "bending"-performed by artisans and professionals when judging a fabric's texture. T...
	Airflow Velocity Distribution Measurement Equipment	Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications development of filter housings and air-ducting elements in general compariso...
	Cabin Air Filter Test System（Particle removal & Gas adsorption），ISO 11155 Cabin Air Filter Performance Test	Test System for both particle separation and gas absorption/desorption of of air filters for passenger compartments (DIN 71460-1/2. ISO 11155-1/2)....

供应产品

Same products

	Plastic Smoke Density Tester F313	卖方: Standard International Group (HK) Limited	The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
	Xenon Test Chamber	卖方: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	卖方: 上海千实精密仪器	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	卖方: 上海千实精密仪器	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	卖方: 上海千实精密仪器	Product details Furniture flammability tester is mainly used to test the combustion performance ...