Plastic ball indentation hardness tester
Scope of application:
It is used to measure the characteristics of the plastic drainage plate in the plane direction of the water flow under the specified pressure. During the test, seepage was carried out under the condition that the lateral pressure of the sample was 350kPa and the hydraulic gradient i=0.5. and the water seepage of the sample in a certain period of time was measured.
Meet the standard:
JTG E50 T1143-2006.SL/T.JT/T 521- Appendix A-2004.JTS-206-1- Appendix B B.3-2009
JTS/T245-2023.etc.
Instrument features:
Customized pressure gauge with imported high precision diffused silicon pressure sensor and 16-bit high resolution A/D converter;
High energy lithium sub-battery is used to power the pressure gauge, and the continuous use time is more than 1.5 years;
Pressure gauge can be adjusted to zero with one click, suitable for a variety of environments;
"kPa, MPa, Psi, mmHg, Bar, Kgf/cm2" six units can be switched;
The open-type hatch door structure is convenient for sample loading.
The body adopts the casting aluminum integrated molding process to ensure the sealing of the pressure chamber;
The specially designed sample holding device prevents the deformation of the plastic core plate of the drainage plate, combined with the sealing design, to ensure that the sample holding is air-tight and water-tight;
The hydraulic gradient can be adjusted by the height of the water tower.
Reasonable design of waterway pipeline reduces the loss of water head in the test, and the result is more accurate;
Pneumatic control element to control the inlet and outlet of compressed air and the size of pressure, to provide side pressure for the test;
Pressure chamber and seal plate can be customized according to customer requirements to meet different sizes of samples.
Technical parameters:
Test chamber structure is open
The effective length of the sample is 400mm
Sample width 100mm can be customized
Side pressure 350+20kPa(gauge accuracy 0.4%FS)
Head difference adjustment range 0——400mm
Accuracy 0.4%
Dimensions Host :715x300x260mm Water tower :440x440x860mm
Weight 35kg
在线联系供应商
Other supplier products
 |
Micro Controll Constant-Speed Friction Plate Tester | Standards GB5763-1998 brake linings for automobiles; GB/T5764-1998 brake linings for automobiles; GB/T5764-1998 brake linings for automobiles. ... |
 |
Digital Fabric Elmendorf Tearing Strength Tester | Tearing Tester Further Details: The Tearing Strength of fabrics, Paper, Plastic Film, or other comparable materials in sheet structure is controlle... |
 |
Liquid Spontaneous ignition point tester | Product Description complies with GB/T 21860-2008 “Test Method for Autoignition Temperature of Liquid Chemicals” and ASTM E “Tes... |
 |
Paper folding tester | Compliance Standards: ISO 2758、ISO 2759 ASTM D774、 D774M TAPPI T 403、TAPPI T 804 Test principle： The machine uses the motor drive screw to m... |
 |
Total Knee Joint Prostheses Wear Test machine | Standard ISO 14243-1:2014: Specifies wear testing parameters for total knee prostheses, including axial loading, flexion/extension kinematics, and... |
Same products
 |
Xenon Test Chamber | 卖方: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | 卖方: 上海千实精密仪器 | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | 卖方: 上海千实精密仪器 | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | 卖方: 上海千实精密仪器 | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
 |
Flame retardant testing machine | 卖方: 上海千实精密仪器 | Feature highlights: Flame Retardant Tester is designed for testing plastic runway surface layers... |
