Catheter Hydraulic Leakage Tester
Compliance Standards
GB/T 15812.1. etc.
Main Uses
The catheter hydrostatic pressure resistance and leakage tester is a device specifically designed to evaluate the sealing performance of catheters in a hydraulic environment. Its main uses include: Ensuring Catheter Safety: Through testing, it ensures that catheters have good sealing performance under various usage conditions, preventing liquid leakage and thus safeguarding the safety of patients. Improving Product Quality: It provides data support for medical device manufacturers, helping them to improve the design and manufacturing processes of catheters, and enhancing the quality and reliability of products. Promoting Technological Advancement: The application of the tester promotes technological progress and development in the medical field, and provides a powerful testing tool for the research and development of new - type catheters.
Technical Parameters
Test Flow: Usually 30L/min, with an error not exceeding ±5%. This parameter ensures that the tester can provide a stable and accurate flow during the test. Pressure Range: Generally 0 - 500KPa, with a resolution of 0.01KPa and an error not exceeding ±1%. This parameter range covers the pressure range that most catheters can withstand in actual use, ensuring the comprehensiveness of the test. Measurement System Holding Time: Usually 1 minute and can be set. This parameter ensures that the tester can maintain a stable measurement environment during the test, improving the accuracy of the test. Test Duration: Generally 1 second - 99.9 minutes, with an error not exceeding ±1 second. This parameter range allows users to flexibly set the test time according to actual needs, ensuring the adequacy and effectiveness of the test. Applicable Catheter Types: It is applicable to a variety of medical device products such as infusion sets, blood transfusion sets, infusion needles, filters, pipelines, catheters, and quick - connect fittings. This wide - ranging applicability enables the tester to meet the testing needs of different medical device products.
在线联系供应商
Other supplier products
 |
Helmet Wearing Height Testing Machine | Main Purposes Measure the wearing height of helmets to ensure the accuracy and safety of helmet - wearing positions. Technical Parameters Supp... |
 |
Hydrogen Sulfide Corrosion Test Chamber | Referenced Standards: Complies with national standard GB/T 978.9-88 "Corrosion Test of Metal and Non-Metal Coatings Under Condensing Sulfur Dioxid... |
 |
Advanced Specific Surface Area and Micropore Analyzer | Test Principle Under low temperature conditions (e.g., liquid nitrogen bath, 77.3K), a certain amount of adsorbate gas (e.g., N₂) is introduced in... |
 |
Abrasive Wear Testing Machine | Standard ASTM G65 - 04 GB/T 3960-1983 Main Purposes The wet - type rubber wheel abrasive wear testing machine is primarily employed to assess t... |
 |
Torque Measurement Device for Metal Bone Screws | Standard YY/T 1506. ASTM F543: The standard specifies the torque required to measure the torque required to screw a metallic bone grafting screw ... |
Same products
 |
Plastic Smoke Density Tester F313 | 卖方: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | 卖方: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | 卖方: 上海千实精密仪器 | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | 卖方: 上海千实精密仪器 | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | 卖方: 上海千实精密仪器 | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
