.

Wet leakage current test system of photovoltaic module

Standard

IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval

UL 61730: Safety Standard for Photovoltaic Modules

ISO 17025: General Requirements for the Competence of Testing and Calibration Laboratories

CE Certification(Conformité Européenne)

Product Advantages

IEC 61215 Compliance

22±3°C Temperature Control: Ensures consistent test conditions for wet insulation resistance measurements.

<3.500 Ω·cm Liquid Resistivity: Guarantees accurate leakage current detection per standard requirements.

Multi-Directional Spray Simulation

360° Adjustable Nozzles: Replicates rain, dew, and irrigation scenarios for PID testing.

Variable Flow Control: 0–10 bar pressure adjustment for customizable exposure intensity.

Corrosion-Resistant Design

15mm Plexiglass Tank: Withstands salt spray and UV exposure without degradation.

316L Stainless Steel Fittings: Prevents electrolyte contamination during prolonged testing.

Safety First

Ground Fault Interrupter (GFI): 30mA trip threshold for operator protection.

Door Interlock System: Halts testing if enclosure is opened during wet cycles.

Smart Data Acquisition

16-Bit Resolution ADC: Captures microamp-level leakage currents with 0.1% accuracy.

AI-Powered Diagnostics: Flags insulation defects and predicts PID degradation risks.

Product Features

Dual-Zone Temperature Control: Separate heating/cooling circuits for water and ambient air.

7” Touchscreen HMI: Preloaded IEC 61215 test sequences with customizable hold times.

Remote Monitoring: Wi-Fi/Ethernet connectivity with SMS/ alerts for anomalies.

Self-Cleaning System: Automated tank drainage and nozzle flushing protocols.

Modular Design: Expandable from single-module to 10-module parallel testing.

Accessories Included

Testing Kit:

4x PV module test fixtures (adjustable for frameless/framed modules).

10x insulated test leads with alligator clips.

Software Suite:

License key forLeakTest Pro(Windows/Linux).

1-year free access to cloud-based I-V curve analyzer.

Calibration & Safety:

NIST-traceable conductivity meter.

Emergency eyewash station (wall-mounted).

Maintenance Kit:

Spare acrylic tank seal and nozzle gaskets.

Tank cleaning solution (non-corrosive).

Documentation:

Multilingual quick-start guide (printed + digital).

Compliance certificates for IEC/UL/ISO standards.

Technical Parameters

ParameterSpecification
Test Tank Dimensions 2.100mm (W) × 1.000mm (D) × 250mm (H)
Tank Material 15mm Cast Acrylic (Plexiglass)
Temperature Range 15°C to 40°C (operational)
Temperature Stability ±0.5°C (at 22°C setpoint)
Liquid Resistivity <3.500 Ω·cm (deionized water recommended)
Spray Pressure 0–10 bar (adjustable)
Flow Rate 0–15 L/min (per nozzle)
Power Supply 230V AC, 50/60Hz (single-phase)
Dimensions 2.500mm (W) × 1.200mm (D) × 1.500mm (H)
Weight 350 kg (net) / 450 kg (gross)

在线联系供应商

至: 上海千实精密仪器
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

The textile photothermal performance tester
The textile photothermal performance tester Application ScopeThe textile photothermal performance tester is mainly used to test textile products' photothermal storage performance, heat-blocki...
Micro-controlled High-temperature Tribological Tester
Micro-controlled High-temperature Tribological Tester Applicable Standards When conducting tests, the microcomputer - controlled high - temperature friction testing machine usually needs to comply wit...
Standard Pacifier Safety Evaluation Tester (for Standard pacifier safety tester)
Standard Pacifier Safety Evaluation Tester (for Standard pacifier safety tester) Overview In the infant care industry, bottle quality directly impacts infant health. The NPNZ-01 Baby Bottle Mechanical Performance Tester is spec...
Wear Resistance Tester for Total Hip Joint Prostheses
Wear Resistance Tester for Total Hip Joint Prostheses Standard YY/T 0651.1-2016 (China): Specifies wear testing parameters for total hip prostheses, including angular motion, loading modes, and enviro...
Aerosol Foams Flammability Test machine
Aerosol Foams Flammability Test machine This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 31.6 Flammability Test for Aerosol ...
供应产品

Same products

FH-77富氢测试笔
FH-77富氢测试笔 卖方: 科立龙电子股份有限公司 产品说明: 用于测量氢气水(富氢水)和氢气水发生器的溶解氢含量。 特征: 1、电极更换方便 智能、携带方便、操作方便、实用; 产品广泛应用于食品、环卫、地质勘探、冶金、地表水、 ...
Xenon Arc Weather Ometer
Xenon Arc Weather Ometer 卖方: Standard Group (Hong Kong) Limited Get a quote: Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ...
Xenotest | Light Fastness Tester Si220 (SunTest)
Xenotest | Light Fastness Tester Si220 (SunTest) 卖方: Standard Group (Hong Kong) Limited Get a quote: Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ...
Ozone Aging Chamber
Ozone Aging Chamber 卖方: Standard Group (Hong Kong) Limited Get a quote: Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum...
Plastic Smoke Density Tester F313
Plastic Smoke Density Tester F313 卖方: Standard International Group (HK) Limited Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ...