Rupture strength tester
Standard
IEC 61730-2: Photovoltaic (PV) Module Safety Qualification – Requirements for Testing
UL 61730: Safety Standard for Photovoltaic Modules
CE Certification(Conformité Européenne)
Product Advantages
Ultra-Wide Pressure Range
250–5.600 kPa (36–812 psi): Tests glass, backsheets, and encapsulants from thin-film to dual-glass modules.
0.01 kg/cm² Resolution: Captures micro-fractures before catastrophic failure.
Precision Engineering
5 kg/cm² Adjustable Holding Pressure: Simulates wind/snow loads per IEC 61730-2.
Multi-Unit Display: Switches between kPa, psi, and kg/cm² for global compliance.
Safety First
Dual Overpressure Protection: Mechanical relief valve + electronic cutoff at 5.600 kPa.
Explosion-Proof Chamber: Reinforced acrylic window for safe failure observation.
User-Centric Design
7” Touchscreen HMI: Preloaded IEC/UL test sequences with auto-hold functions.
Voice-Guided Setup: Step-by-step audio prompts for operators.
Data Integrity
Built-In Printer: Generates ISO 17025-compliant test certificates on-site.
SD Card Logging: Exports pressure-time curves for R&D analysis.
Product Features
Quick-Change Fixtures: Adapts to 2–20 mm module thicknesses.
Dynamic Pressure Control: Ramp rates from 1 kPa/s to 100 kPa/s.
Self-Calibrating System: Auto-tare and linearity checks before each test.
Rust-Resistant Frame: 304 stainless steel construction with epoxy coating.
Portable Design: 60 kg weight with integrated handles for lab-to-line mobility.
Accessories Included
Testing Kit:
1x Specialized Clamping Fixture (for 2–20 mm modules).
2x High-Temperature Rubber Membranes (300°C rated).
5x Aluminum Foil Calibration Discs.
Consumables:
1x 85% Glycerin Solution Bottle (for hydraulic calibration).
10x Disposable Dust Filters.
Documentation:
Multilingual Quick-Start Guide (printed + digital).
Compliance Certificates for IEC/UL Standards.
Safety Gear:
2x Safety Goggles (ANSI Z87.1 rated).
1x Emergency Pressure Release Key.
Technical Parameters
| Parameter | Specification |
|---|---|
| Pressure Range | 250–5.600 kPa (36–812 psi) |
| Resolution | 0.01 kg/cm² (1.42 psi) |
| Holding Pressure | 5 kg/cm² (71 psi) adjustable |
| Air Source | 6 kg/cm² (87 psi) min (customer-provided) |
| Control Accuracy | ±1% FS (full scale) |
| Power Supply | 220V AC, 50/60Hz (single-phase) |
| Dimensions | 560mm (W) × 470mm (D) × 550mm (H) |
| Weight | 60 kg (net) |
在线联系供应商
Other supplier products
 |
Molten Metal Penetration Resistance chamber | Standard ISO 9185(Protective Clothing - Assessment of Resistance to Molten Metal Splash) ASTM F955(Standard Test Method for Evaluating Heat Tra... |
 |
Horizontal paper tensile strength testing machine | Product Introduction: G103C horizontal tensile strength tester adopts paper tensile strength software, which is a paper resistance tester for meas... |
 |
Circular Locus Pilling Tester | Standard GB/T.1Determination of pilling properties of textile fabrics - Part 1: Circular trajectory methodJIGBell-type gas flow standard device ve... |
 |
High Velocity Impact Tester | Main Purpose To test the impact - resistance performance of glasses, goggles and face shields at a certain speed. Applicable Standards SNELL S... |
 |
Resistance Tester for Molten Metal Droplet (Splash) Impact tester | Performance and Standards: This resistance tester for molten metal droplet (splash) impact performance is developed in accordance with testing sta... |
Same products
 |
Xenon Test Chamber | 卖方: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | 卖方: 上海千实精密仪器 | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | 卖方: 上海千实精密仪器 | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | 卖方: 上海千实精密仪器 | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
 |
Flame retardant testing machine | 卖方: 上海千实精密仪器 | Feature highlights: Flame Retardant Tester is designed for testing plastic runway surface layers... |
