Wet leakage current test system of photovoltaic device
Standard
IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
UL 61730: Safety Standard for Photovoltaic Modules
ISO 17025: General Requirements for the Competence of Testing and Calibration Laboratories
CE Certification(Conformité Européenne)
Product Advantages
IEC 61215 Compliance
22±3°C Temperature Control: Ensures consistent test conditions for wet insulation resistance measurements.
<3.500 Ω·cm Liquid Resistivity: Guarantees accurate leakage current detection per standard requirements.
Multi-Directional Spray Simulation
360° Adjustable Nozzles: Replicates rain, dew, and irrigation scenarios for PID testing.
Variable Flow Control: 0–10 bar pressure adjustment for customizable exposure intensity.
Corrosion-Resistant Design
15mm Plexiglass Tank: Withstands salt spray and UV exposure without degradation.
316L Stainless Steel Fittings: Prevents electrolyte contamination during prolonged testing.
Safety First
Ground Fault Interrupter (GFI): 30mA trip threshold for operator protection.
Door Interlock System: Halts testing if enclosure is opened during wet cycles.
Smart Data Acquisition
16-Bit Resolution ADC: Captures microamp-level leakage currents with 0.1% accuracy.
AI-Powered Diagnostics: Flags insulation defects and predicts PID degradation risks.
Product Features
Dual-Zone Temperature Control: Separate heating/cooling circuits for water and ambient air.
7” Touchscreen HMI: Preloaded IEC 61215 test sequences with customizable hold times.
Remote Monitoring: Wi-Fi/Ethernet connectivity with SMS/ alerts for anomalies.
Self-Cleaning System: Automated tank drainage and nozzle flushing protocols.
Modular Design: Expandable from single-module to 10-module parallel testing.
Accessories Included
Testing Kit:
4x PV module test fixtures (adjustable for frameless/framed modules).
10x insulated test leads with alligator clips.
Software Suite:
License key forLeakTest Pro(Windows/Linux).
1-year free access to cloud-based I-V curve analyzer.
Calibration & Safety:
NIST-traceable conductivity meter.
Emergency eyewash station (wall-mounted).
Maintenance Kit:
Spare acrylic tank seal and nozzle gaskets.
Tank cleaning solution (non-corrosive).
Documentation:
Multilingual quick-start guide (printed + digital).
Compliance certificates for IEC/UL/ISO standards.
Technical Parameters
| Parameter | Specification |
|---|---|
| Test Tank Dimensions | 2.100mm (W) × 1.000mm (D) × 250mm (H) |
| Tank Material | 15mm Cast Acrylic (Plexiglass) |
| Temperature Range | 15°C to 40°C (operational) |
| Temperature Stability | ±0.5°C (at 22°C setpoint) |
| Liquid Resistivity | <3.500 Ω·cm (deionized water recommended) |
| Spray Pressure | 0–10 bar (adjustable) |
| Flow Rate | 0–15 L/min (per nozzle) |
| Power Supply | 230V AC, 50/60Hz (single-phase) |
| Dimensions | 2.500mm (W) × 1.200mm (D) × 1.500mm (H) |
| Weight | 350 kg (net) / 450 kg (gross) |
在线联系供应商
Other supplier products
 |
Bag lifting fatigue testing machine | Product Introduction: This machine is suitable for up and down vibration fatigue test of plastic handbag, garbage vest bag, kraft paper bag, woven... |
 |
High-precision Material Thermal Conductivity Tester | Introduction It adopts the internationally popular method of heat flow meter to detect thermal conductivity and thermal resistance, and realizes f... |
 |
In-situ expansion analysis system | Standard ASTM E83: Standard Test Method for Verification of Linear Displacement Measuring Systems ISO 12417-1: Mechanical Testing of Metals &ndas... |
 |
Sliding Bearing Fatigue meter | Standards ASTM D2596 / ASTM D2783 / IP 239 EP, DIN 51350 / 1-5. ISO / CD 11008. VW 1444. VW 1454 Material Research and Development During the re... |
 |
Powder Wet Vibrating Screen System For Lithium Battery Material Testing | tandard ASTM E11: Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves ISO 3310-1: Test Sieves – Technical Requirements... |
Same products
 |
Custom Stainless Components for OEM Applications | 卖方: Yongjia County Yaokang Technology Co., Ltd. | Our stainless steel float balls are designed for float valves, water tanks, and industrial liquid... |
 |
FH-77富氢测试笔 | 卖方: 科立龙电子股份有限公司 | 产品说明： 用于测量氢气水（富氢水）和氢气水发生器的溶解氢含量。 特征： 1、电极更换方便 智能、携带方便、操作方便、实用； 产品广泛应用于食品、环卫、地质勘探、冶金、地表水、 ... |
 |
Xenon Arc Weather Ometer | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ... |
 |
Xenotest | Light Fastness Tester Si220 (SunTest) | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ... |
 |
Ozone Aging Chamber | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum... |
