.

Coatings Shear Fatigue Test device

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Standard

YY/T 0988.13-2017 (China): Specifies shear fatigue testing protocols for coatings on metallic substrates, including load ratios, frequency, and failure criteria.

ASTM F1160-17 (International): Defines methodologies for evaluating the mechanical performance of implant-coating interfaces under cyclic loading.

Product Advantages

Ultra-Precision Loading: Electromagnetic servo motor ensures backlash-free operation with 0.001 N shear force resolution.

Biorelevant Simulation: Integrated 37°C water bath system replicates physiological conditions for in vitro corrosion testing.

Universal Fixturing: Self-centering clamps accommodate substrates (10–50 mm diameter) and coatings (1–200 µm thickness).

High-Cycle Endurance: 10 million cycle capacity with ±0.05% load accuracy.

Compact Design: Benchtop footprint (500 × 450 × 700 mm) suits laboratory environments.

Regulatory Compliance: Pre-loaded YY/T 0988.13 protocols with automated data reporting for FDA/CE submissions.

Product Features

Electromagnetic Servo Actuator: 10 kN shear load capacity with programmable R=0.1–10 ratios.

Dual Sensor System: 0.01 N resolution shear force transducer + 0.001 mm LVDT displacement sensor.

Dynamic Load Control: 0.1–30 Hz frequency range with sine/square/random waveforms.

Thermal-Mechanical Bath: 37±0.5°C recirculating water system with anti-evaporation design.

High-Resolution Imaging: Built-in 5MP camera system for coating delamination analysis.

Safety Suite: Emergency stop, overload clutches, and water leak detection system.

Technical Parameters

ParameterSpecification
Max. Shear Force ±10.000 N (0.01 N resolution)
Frequency Range 0.1–30 Hz (0.01 Hz increments)
Load Ratio (R) 0.1–10 (adjustable)
Displacement Range ±2 mm (0.001 mm resolution)
Water Bath Temperature 37±0.5°C (PT1000 sensor)
Data Sampling Rate 10 kHz (synchronized across 8 channels)
Power Requirements 220V/110V ±10%, 50/60Hz, 1.500W
Dimensions (W×D×H) 500 × 450 × 700 mm
Weight 70 kg (net) / 80 kg (with water bath)
Noise Level

Standard Accessories

Shear Fixture Kit:

Self-centering clamps (10–50 mm substrate compatibility)

Coating thickness gauges (1–200 µm measurement range)

Thermal-Mechanical Bath:

15L capacity with recirculating pump

Corrosion-resistant titanium interior

CoatingTest Pro Software:

Automated S-N curve generation and adhesion failure analysis

21 CFR Part 11-compliant audit trail with blockchain timestamping

Remote monitoring via iOS/Android app

Operator Kit:

Calibrated torque wrench set (0.1–10 Nm)

Substrate alignment jigs (ASTM F1160 compliant)

Calibration Bundle:

NIST-traceable force calibration weights

LVDT verification tool

Safety Kit:

Water leak detection system

Acoustic enclosure with 25 dB noise reduction


在线联系供应商

至: Standard International Group (HK) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Seatbelt Fabric Pilling Tester
Seatbelt Fabric Pilling Tester Whats/App: +86 156 1874 6768 Web: standard-groups.com The Seatbelt Fabric Pilling Tester is designed to simulate the pilling and wear of garments...
Safety Helmets Against Molten Metal Splashing Tester
Safety Helmets Against Molten Metal Splashing Tester Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard GB/T 2812-XXXX: Safety Helmets – Test Methods for Molten Metal Resistance (...
BS 5852 Combustion Tester,cigarette ignition tester
BS 5852 Combustion Tester,cigarette ignition tester Whats/App: +86 156 1874 6768 Web: standard-groups.com BS 5852 combustion test equipment is widely used to test the flame retardant properties in ...
Glow Wire Combustion Tester
Glow Wire Combustion Tester Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ASTM D 6194-03:Standard Test Method for Glow-Wire Ignition of Materials ASTM D6...
Self accelerating decomposition temperature test system
Self accelerating decomposition temperature test system Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The Autocatalytic Decomposition Temperature Tester with Thermal Insulation is...
供应产品

Same products

FH-77富氢测试笔
FH-77富氢测试笔 卖方: 科立龙电子股份有限公司 产品说明: 用于测量氢气水(富氢水)和氢气水发生器的溶解氢含量。 特征: 1、电极更换方便 智能、携带方便、操作方便、实用; 产品广泛应用于食品、环卫、地质勘探、冶金、地表水、 ...
Xenon Arc Weather Ometer
Xenon Arc Weather Ometer 卖方: Standard Group (Hong Kong) Limited Get a quote: Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ...
Xenotest | Light Fastness Tester Si220 (SunTest)
Xenotest | Light Fastness Tester Si220 (SunTest) 卖方: Standard Group (Hong Kong) Limited Get a quote: Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ...
Ozone Aging Chamber
Ozone Aging Chamber 卖方: Standard Group (Hong Kong) Limited Get a quote: Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum...
Plastic Smoke Density Tester F313
Plastic Smoke Density Tester F313 卖方: Standard International Group (HK) Limited Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ...