Surgical Mask Flame Retardancy Tester
Flame-retardant tester for surgical mask, In case of the mask is accidentally exposed to flame, its flame-retardant performance is directly related to the safety of medical personnel. The flame-retardancy of mask is one of the important physical indicators for measuring the quality of surgical masks.
Standards:
GB 19083-2010 Technical Requirements for Medical Protective Masks, 5.5 Performances of Synthetic Blood Penetration and Barrier
YY 0469-2011 Technical Requirements for Medical Surgical Masks, Blood Penetration Test Device
GB 2626-2006 Respiratory protective equipment,Filtered particulate respirator,Flammability
BS EN136-1998 Respiratory protection equipment Full Face Mask Requirements test sign
Major Features
Touch-tone + Counting module control
The digital display counter can preset the 1-99999s time test and automatically stops after the test is completed.
Emulational human head model
The mask clamp is a metal human head model that can fully simulate the actual use of the mask.
High degree of equipment automation
The instrument automatically records the burning time and flame-retardant time with digital display, and equipped with flame temperature measuring probe, flame temperature display, with characteristic of automatic ignition and adjustable flame height.
Application:
flame-retardant tester for surgical mask , It is mainly used to test the burning performance of surgical masks after contact with flame at a certain line speed, which is a special test instrument for flame-retardant performance of surgical masks.
It is applicable to the performance verification of new products, quality control of the production department, and the of material properties for the third-party testing organization, the product performance verification laboratory, and the quality and technical supervisiondepartment, etc.
Technical Parameters
|
Test mode: automatic |
Burner timing:0~9999.9₮ |
|
Linear velocity of head model automatic movement: (60±5) mm/s |
Distance between the top of the burner and the lowest point of the mask: (20±2) mm, The flame is at a height of (20±2) mm from the top of the burner |
|
Flame height:40±4mm |
Temperature: (800 ±50) C |
|
Temperature sensor: thermocouple detection |
Weight:65k |
|
Burner height adjustment range:30mm |
Power supply:220V 5Hz |
|
Wall thickness of metal head model: 2~3mm |
Physical dimension:810mm* 510 mm* 870 mmBurner timing:0~9999.9₮ |
|
flame resistant and resistance to burning |
在线联系供应商
Other supplier products
 |
Scratch-resistance testing machine for low voltage wire and cable for road vehicles | Product Introduction: Low voltage wire and cable scratch-resistance tester for road vehicles is a device used to scratch the insulating surface of... |
 |
Gas Hazardous Characteristics Tester | This tester is used to test the flammable concentration range of gases in air. It is suitable for the vast majority of pure flammable gases and mix... |
 |
In-situ expansion analysis system | Standard ASTM E83: Standard Test Method for Verification of Linear Displacement Measuring Systems ISO 12417-1: Mechanical Testing of Metals &ndas... |
 |
Sliding Bearing Fatigue meter | Standards ASTM D2596 / ASTM D2783 / IP 239 EP, DIN 51350 / 1-5. ISO / CD 11008. VW 1444. VW 1454 Material Research and Development During the re... |
 |
Vacuum Blood Collection Tube Suction Volume meter | The main uses, compliance standards, and technical parameters of the Vacuum Blood Collection Tube Aspiration Volume Tester are as follows: Complia... |
Same products
 |
Custom Stainless Components for OEM Applications | 卖方: Yongjia County Yaokang Technology Co., Ltd. | Our stainless steel float balls are designed for float valves, water tanks, and industrial liquid... |
 |
FH-77富氢测试笔 | 卖方: 科立龙电子股份有限公司 | 产品说明： 用于测量氢气水（富氢水）和氢气水发生器的溶解氢含量。 特征： 1、电极更换方便 智能、携带方便、操作方便、实用； 产品广泛应用于食品、环卫、地质勘探、冶金、地表水、 ... |
 |
Xenon Arc Weather Ometer | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ... |
 |
Xenotest | Light Fastness Tester Si220 (SunTest) | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ... |
 |
Ozone Aging Chamber | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum... |
