Safety Helmet Flammability Tester
Product Introduction:
Safety hat flame retardant performance tester for safety hat flame retardant performance test, high degree of automation, easy to operate, widely used in safety hat manufacturers, major quality inspection units and construction engineering testing stations.
According to the criteria:
GB/T 2811-2007 "Hard Hat"
GB/T 2812-2006 "Safety Helmet Test Method"
GB/T 38305-2019 "Head Protection Rescue Helmet"
CEISO9001 1S017025
Product Advantages:
Measures Critical Safety Property: Quantifies the flame retardant performance of safety helmets, essential for protecting wearers in environments with fire hazards.
Standard Compliant: Designed to meet relevant national standards (GB/T 2811. GB/T 2812. GB/T 38305) for safety helmet flame resistance testing.
High Automation: Features a high degree of automation, ensuring consistent test execution and ease of use.
Provides Objective Timing: Includes precise timers for measuring afterflame and afterglow times.
Uses Standardized Flame Source: Utilizes a Bunsen burner with specified dimensions and allows the use of standard test gases.
Suitable for Safety Hats/Helmets: Specifically designed for testing head protective equipment.
Widely Used: Adopted by manufacturers and testing/inspection bodies in the safety helmet industry.
Product Features:
Standard Bunsen burner with a specified inner diameter (10mm) to provide the test flame.
Mechanism for positioning the Bunsen burner flame relative to the safety helmet or test specimen according to the standard's requirements.
Igniter timing system to control the duration for which the flame is applied to the specimen, with a wide adjustable range (0-999.9 seconds) and a typical setting (10 seconds).
Follow-on timer system to accurately measure the afterflame time (how long the specimen burns with a flame after the Bunsen burner is removed) and afterglow time (how long the specimen continues to glow without a flame), with a specified accuracy ($pm$0.01 seconds).
Flame length measuring device with a scale (50mm length) to ensure the test flame is set to the correct size.
Capability to use specified gases (methane, propane, butane, LPG) as the fuel for the Bunsen burner, as required by the test standard.
Fixture or system to securely mount the safety helmet or a test specimen cut from the helmet for testing.
High degree of automation for the test procedure, from flame application to timing.
Safety features (implied) for conducting flame tests.
Main parameters:
Inner diameter of Bunsen burner: 10mm
Igniter timing: 0 —— 999.9 seconds arbitrary setting, the international adoption of 10 seconds
Follow-on timer: 0 —— 999.9 seconds, accuracy: ±0.01 seconds
Flame length measuring device: scale length 50mm
Gas used: methane, propane, butane, LPG 3W '
Power supply: AC220V, 50Hz, 50W
在线联系供应商
Other supplier products
 |
Sharp Edge Detection/Testing Apparatus (for Sharp edge tester) | Standards : ASTM F963 4.8. EN71-1998 8.14. GB6675-2003 A.5.9. 16CFR 1500.48 Basic Configuration： Sharp Edge Tester: 1 unit Foot switch: 1 set ... |
 |
Safety Helmets Impact and Penetration Resistance Tester | Standard GB/T 2811-2019(China’s national standard for helmet safety and impact resistance) GB/T 2812-2006/XXXX(Testing methods for impact... |
 |
Automotive Comfort Air Conditioning Dummy Test System | Applicable standards： ISO related standards, such asISO 14505-2, which provide test methods and evaluation indicators for thermal comfort. Berkel... |
 |
Safety Helmets Wearing Stability Tester | Standard GB 811-2022: Safety Helmets – General Technical Requirements GB 24429-2009: Sports Helmets – Requirements and Test Methods ... |
 |
Diaper leakage tester | Main uses: Nonwovens liquid loss measurement instrument is mainly used to measure the amount of liquid loss in nonwovens material and evaluate its... |
Same products
 |
FH-77富氢测试笔 | 卖方: 科立龙电子股份有限公司 | 产品说明： 用于测量氢气水（富氢水）和氢气水发生器的溶解氢含量。 特征： 1、电极更换方便 智能、携带方便、操作方便、实用； 产品广泛应用于食品、环卫、地质勘探、冶金、地表水、 ... |
 |
Xenon Arc Weather Ometer | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ... |
 |
Xenotest | Light Fastness Tester Si220 (SunTest) | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ... |
 |
Ozone Aging Chamber | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum... |
 |
Plastic Smoke Density Tester F313 | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ... |
