Chromium carbide powder with uniform microstructure
The powder has a high hardness, with a microhardness of up to 2200HV. The hardness of the wear-resistant coating prepared from it can reach over HRC65, making it suitable for applications that require high-stress wear, such as surface strengthening of excavator bucket teeth and crusher hammer heads. The bonding strength between the coating and the substrate is high, reaching over 50MPa, and it is not easy to peel off, ensuring long-term usage effect. In mining machinery, parts treated with chromium carbide coating can withstand the severe impact and friction of ores, and their service life is increased by 4 to 6 times. Chromium carbide powder is often irregular grayish-black particles with a particle size of 10-40μm, a purity of ≥98%, and a free carbon content of ≤0.5%. It features high hardness and excellent wear resistance, with a bulk density of 2.9-3.2g/cm³, and is suitable for thermal spraying and surfacing processes. It is widely used for surface strengthening of easily worn parts such as mine crusher liners and metallurgical roller tracks, effectively resisting material erosion and extending the service life of equipment.
在线联系供应商
Other supplier products
 |
Anti-bending and non-deformation titanium carbide guide wheel | Titanium carbide guide wheel is a high-performance transmission component made of titanium carbide as the core material. It is extremely high hardn... |
 |
Low oxygen and free carbon quality stable titanium carbide powder | Titanium Carbide powder is a grey-black high hardness ultra-fine powder with the chemical formula of TiC, which has both metal and ceramic proper... |
 |
Chromium carbide powder perfectly combined with nickel/cobalt-based alloys | The main methods for preparing this powder include the electric arc furnace method and the carbothermal reduction method. Among them, the powder pr... |
 |
Hot Isostatic Pressing (HIP) Round Bar | Titanium carbide cermet rods (TiC rods) belong to the group of steel-jointed cemented carbides, which are composites of steel as the bonding phase ... |
 |
Nano grade titanium carbide alloy round bar | 该圆棒的生产工艺极其严谨，从碳化钛粉末纯度的控制（纯度≥99.5%）到烧结温度的精确调控（约1500℃），每一个环节都影响着最终的性能。成品尺寸稳定性极佳，在-50℃至300℃的温度变化下，热膨胀系数仅为6×10-⁶/℃，远低于金属材料，确保了精密工具在不同环境下的精度。它广... |
