Titanium carbide guide wheel - high precision
The titanium carbide-based cemented carbide guide wheel exhibits exceptional thermal shock resistance, maintaining structural integrity even under rapid temperature fluctuations from room temperature to 300°C and back. This characteristic makes it highly suitable for intermittent industrial operations. The guide wheels are available in a wide range of dimensions, with diameters spanning 50 mm to 500 mm and widths ranging from 10 mm to 100 mm, enabling compatibility with various wire drawing and rolling equipment. In optical fiber and cable manufacturing, these guide wheels ensure precise fiber alignment, maintaining signal attenuation below 0.2 dB/km and thereby guaranteeing high-quality communication performance. As critical guiding components in wire and tube production, titanium carbide-cobalt composite guide wheels are fabricated through powder metallurgy processes using high-purity titanium carbide reinforced with a cobalt binder phase. These components achieve a surface hardness of up to HRC 88 and demonstrate wear resistance exceeding 50 times that of conventional steel guide wheels. Roundness accuracy is maintained within 0.002 mm, ensuring stable wire movement during high-speed drawing processes (up to 100 m/s) without vibration or lateral deviation. In stainless steel wire production, the application of these guide wheels reduces surface roughness from Ra 1.6 μm to Ra 0.4 μm, significantly enhancing product surface quality.
在线联系供应商
Other supplier products
 |
Titanium carbide powder, a raw material for wear-resistant and corrosion-resistant coatings | This powder has excellent electrical and thermal conductivity, with an electrical conductivity of 3×10⁴S/m and a thermal conductivity of 35W/... |
 |
Customised titanium carbide round rods | Tungsten carbide titanium carbide round bar is a high-performance bar made by powder metallurgy process, with titanium carbide as the main hard p... |
 |
Industrial guide wheels - titanium carbide alloy wear-resistant | Hard alloy titanium carbide guide wheels serve as critical guiding components in the manufacturing processes of wire and tubular materials. These c... |
 |
Titanium carbide hard alloy rods are highly hard and wear-resistant | 与传统高速钢棒材相比，硬质合金碳化钛圆棒的切削速度可提高3至5倍，可显著缩短批量生产中的加工时间。其微观组织均匀，晶粒尺寸可控制在1μm以下，确保棒材各部位性能一致，避免因材质不均导致的刀具失效。在模具行业，用其制成的冷冲压模具镶块，其使用寿命是钢制镶块的50至100倍，可显著降低更换频... |
 |
Titanium carbide hard rods - materials for hardware manufacturing | The length of this round bar can be customized according to specific requirements, ranging from 100 mm to 1000 mm, and it is amenable to secondary ... |
