Titanium carbide hard rods - special for extrusion dies

Hard alloy titanium carbide round rods can be tailored to achieve specific performance characteristics by adjusting the titanium carbide content (typically 70%–90%) and the binder proportion. Higher titanium carbide content enhances wear resistance, making the material suitable for rough machining applications, while an increased binder ratio improves toughness, rendering it more appropriate for precision machining. With a density of only 6.5 g/cm³, these rods are approximately 20% lighter than tungsten carbide counterparts of comparable dimensions, which makes them ideal for lightweight tooling solutions. In the 3C electronics industry, they are widely employed in the machining of high-precision components such as mobile frames and laptop housings, ensuring scratch-free surfaces and minimal dimensional deviations. The rod length is customizable, ranging from 100 mm to 1000 mm, and the material is amenable to secondary processing techniques—including precision grinding and wire cutting—enabling the production of complex geometries. Although the initial cost exceeds that of conventional cemented carbide, the extended service life and superior processing efficiency result in a lower unit production cost over time. In gear manufacturing, hobs fabricated from this material can achieve gear tooth surface accuracy of grade 6 or higher, fulfilling the stringent requirements of advanced mechanical transmission systems.

Other supplier products

	Chromium carbide powder with uniform microstructure	The powder has a high hardness, with a microhardness of up to 2200HV. The hardness of the wear-resistant coating prepared from it can reach over HR...
	Titanium carbide hard alloy rods - Strong load-bearing capacity	The length of this round bar can be customized according to specific requirements, ranging from 100 mm to 1000 mm. It is amenable to secondary proc...
	Low-noise titanium carbide hard alloy guide wheel	The installation holes of the guide wheel have high precision, and the fit clearance with the shaft can be controlled within 0.005-0.01mm, ensuring...
	Stable and reliable titanium carbide hard alloy round bars	The production process of this round bar is extremely strict, from the purity control of titanium carbide powder (purity ≥99.5%) to the precise ...
	Highly wear-resistant titanium carbide hard alloy drum	The installation holes of the guide wheel have high precision and the clearance between it and the shaft can be controlled within 0.005 - 0.01mm, e...

供应产品

Same products

	3D printing spherical titanium carbide powder	卖方: 株洲华斯盛高科材料有限公司	This batch of titanium carbide powder (TiC) has a purity of over 99.5%, with a particle size cont...
	Titanium carbide hard alloy drive wheel - Specialized	卖方: 株洲华斯盛高科材料有限公司	The titanium carbide (TiC) guide wheel is fabricated via high-temperature powder metallurgy sinte...
	Industrial guide wheels, titanium carbide wear-resistant alloy	卖方: 株洲华斯盛高科材料有限公司	This carbonized titanium (TiC) guide wheel is formed by high-temperature sintering of 99.5% pure ...
	Unfinished bar stock - heat treatable	卖方: 株洲华斯盛高科材料有限公司	This high-purity titanium carbonitride (TiCN) round bar is fabricated via hot-pressing and sinter...
	Steel-based titanium carbide hard alloy round bar	卖方: 株洲华斯盛高科材料有限公司	This carbonitride round bar (TiC) is formed by hot-pressing and sintering 99.5% high-purity carbo...