Titanium carbide hard alloy guide wheel - Wear-resistant
The surface of the guide wheel can be specially treated as required. For instance, after being sprayed with a diamond coating, its wear resistance can be further enhanced by 30%, making it suitable for processing high-hardness alloy wires. Its weight is 30% lighter than that of steel guide wheels of the same size, which can reduce the load on the drive motor and lower energy consumption by more than 15%. In the production of precision tubes, the groove accuracy of the guide wheel reaches IT3 grade, which can ensure that the outer diameter tolerance of the tube is controlled within ±0.01mm, meeting the high-precision requirements of the medical, aviation and other fields. Compared with ceramic guide wheels, this type of guide wheel has better toughness and is less likely to break due to minor collisions, reducing the frequency of replacement. Its service life is 2 to 3 times that of ceramic guide wheels. In the production of steel cord, a set of guide wheels can produce over 1,000 tons of cord, while ceramic guide wheels can only produce 300 to 500 tons. The cost-performance advantage of guide wheels has enabled them to be widely used in the tire industry, helping to enhance the wear resistance and safety of tires.
Other supplier products
|
|
Titanium carbide hard alloy guide wheels are wear-resistant and durable |
Hard alloy titanium carbide guide wheels are impact-resistant and unlikely to crack or deform during sudden wire tensioning or breakage, reducing t... |
|
|
Dense and strong titanium carbide powder |
Titanium carbide powder has excellent chemical stability, insoluble in water, hydrochloric acid, sulphuric acid and other common acids and alkalis,... |
|
|
Impact-resistant and non-deformable titanium carbide guide wheel |
The guide wheel features high-precision installation holes, with a fit clearance relative to the shaft controlled within the range of 0.005–0... |
|
|
Stable quality carbide guide wheel guide roller |
Guide roll (guide wheel) is the steel field bar, wire rod rolling equipment on the main consumption of spare parts, in the rolling process, to en... |
|
|
Sub-micron titanium carbide powder |
Titanium carbide powder has high sintering activity and can be sintered densely at 1300-1500℃, which is 200-300℃ lower than the sintering temperatu... |
供应产品
Same products
