Titanium carbide hard alloy guide wheels - accessories
The installation holes of the guide wheel have high precision, and the fit clearance with the shaft can be controlled within 0.005-0.01mm, ensuring no shaking during rotation and improving the guiding accuracy. Its maintenance cost is low, and it does not require frequent lubrication. Only regular cleaning of surface impurities is needed, making it suitable for continuous operation of automated production lines. In the production of metal wire mesh, guide wheels can ensure the uniformity of the mesh holes of the wire mesh, keeping the error within 5% and meeting the strict requirements of filter materials. Compared with ceramic guide wheels, this type of guide wheel has better toughness and is less likely to break due to minor collisions, reducing the frequency of replacement. Its service life is 2 to 3 times that of ceramic guide wheels. In the production of steel cord, a set of guide wheels can produce over 1,000 tons of cord, while ceramic guide wheels can only produce 300 to 500 tons. The cost-performance advantage of guide wheels has enabled them to be widely used in the tire industry, helping to enhance the wear resistance and safety of tires.
在线联系供应商
Other supplier products
 |
Customised diameter/length round bars available | Titanium carbide alloy round bar is made of titanium carbide as the hard phase and metal powder as the binder phase, which is made by powder meta... |
 |
Titanium carbide hard alloy guide wheel - transmission | The installation holes of the guide wheel have high precision, and the fit clearance with the shaft can be controlled within 0.005-0.01mm, ensuring... |
 |
Sub-micron titanium carbide powder | Titanium carbide powder has high sintering activity and can be sintered densely at 1300-1500℃, which is 200-300℃ lower than the sintering temperatu... |
 |
Factory Direct Supply Chromium Carbide Powder | Chromium carbide powder is gray-black in color, with high hardness, excellent abrasion resistance, high temperature and chemical corrosion resist... |
 |
Nano grade titanium carbide alloy round bar | 该圆棒的生产工艺极其严谨，从碳化钛粉末纯度的控制（纯度≥99.5%）到烧结温度的精确调控（约1500℃），每一个环节都影响着最终的性能。成品尺寸稳定性极佳，在-50℃至300℃的温度变化下，热膨胀系数仅为6×10-⁶/℃，远低于金属材料，确保了精密工具在不同环境下的精度。它广... |
