High-Density Compounds
High-density plastic has a density of up to 13g/cm3 by adding high-density powder to the plastic matrix, which is higher than that of ordinary metal. It can be used as a shielding enclosure for high-energy rays, counterweight material, substitute material for lead, etc.
Properties of Soft Magnetic Bonded Compounds
Less production process and suitable for automatic production
The product is energy-efficient and harmless to the environment
Applications of Soft Magnetic Bonded Compounds
Counterweight material (counterweight of automobile, imitation gun, golf equipment, etc.); Medical industry.
Specification of High-density Compounds and Metal Bonded Plastic
Grade |
HAA |
HCA |
HWA |
||
Resin Binder |
PA6 |
||||
Mechanical Properties |
Tensile Strength |
MPa |
55 |
60 |
66 |
Flexural Strength |
MPa |
100 |
105 |
112 |
|
Physical Properties |
Mold Density |
g/cm3 |
2 |
10 |
|
Melt Flow Rate |
g/10min |
132 |
145 |
155 |
|
HDT |
℃ |
150 |
150 |
150 |
|
Thermal conductivity |
W/(m·K) |
||||
Mold Shrinkage Rate |
% |
||||
Injection Parameters |
Pre-drying Temp |
℃ |
80-110 |
80-110 |
80-110 |
Pre-drying Time |
hr |
||||
Barrel Temp |
H1 ℃ |
260-270 |
260-270 |
260-270 |
|
H2 ℃ |
270-280 |
270-280 |
270-280 |
||
H3 ℃ |
275-285 |
275-285 |
275-285 |
||
Mold Temp |
℃ |
80-90 |
80-90 |
80-90 |
|
Pressure |
bar |
65-80 |
65-80 |
65-80 |
|
Speed |
V% |
60-80 |
60-80 |
60-80 |
Chase Technology is a market-oriented comprehensive technology company, we provide ferrite compound, Hard Magnetic Bonded Compounds, Soft Magnetic Bonded Compounds, hard magnet and soft magnet, Magnet Solutions, best material for magnet, high gravity compounds, Ferrite bonded magnetand so on. Want to know more? Please contact us.
在线联系供应商
Other supplier products
High-Density Compounds | High gravity compoundshavea density of up to 13g/cm3 by adding high-density powder to the plastic matrix, which is higher than that of ordinary met... | |
Bonded SmFeN Magnetic Compounds | Introduction SmFeNmagnetic material uses abundant rare-earth Sm element instead of expensive elements of Nd, Dy, Co, etc, and is the most cost-e... | |
Hard-Ferrite Bonded Magnetic Compounds | Ferrite bonded magnetic compounds create a high-cost performancebecause ferrite magnet densityis light and cost is low. Therefore, ferrite compound... | |
Hard Magnetic Bonded Compounds | Magnets and magnet assemblies have to meet increasingly complex requirements. Hard-Ferrite Bonded Magnetic Compounds Compared to rare earth mag... | |
Hard Magnetic Bonded Compounds | Magnets and magnet assemblies have to meet increasingly complex requirements. Hard-Ferrite Plastic Bonded Magnets Compounds Compared to rare earth ... |
Same products
Magnetic Core | 卖方: Shenzhen Magnetic Cube Technology Co.,Ltd. | A Magnetic Coreis a device used for storing and transforming electromagnetic energy. Made primari... | |
Rubber Coated Magnets | 卖方: NingBo BeiLun Meank Magnetics Co.,ltd. | The application of permanent magnets is increasing rapidly day by day, especially neodymium (NdFe... | |
Plastic Coated Magnets | 卖方: NingBo BeiLun Meank Magnetics Co.,ltd. | Plastic coated magnetsalso called as plastic covered magnets or plastic encased magnets.They are ... | |
Neodymium Cube Magnets | 卖方: NingBo BeiLun Meank Magnetics Co.,ltd. | Cube magnets(cubic magnets) are special block magnets, which have the same sizes for length, widt... | |
Neodymium Blocks/Rectangle Magnets | 卖方: NingBo BeiLun Meank Magnetics Co.,ltd. | Block magnets can be called as magnet blocks, rectangle magnets, rectangular magnets and square m... |