90°Elbows Pipe Fittings 45° Elbows Pipe Fittings
90°Elbows Pipe Fittings
A 90°elbow is a metal pipe fitting that changes the direction of the pipe on a carbon steel pipe. Connection mode has wire buckle and welding. (our company mainly produces welded carbon steel elbow of steel pipe)
According to the angle: 45 °, 90 °, 180 °these three kinds of commonly used bends, also has the engineering need, may specially customize such as 60 °and so on. Connection with carbon steel pipe: welding, flange connection, threaded connection, socket connection, etc. According to the process can be divided into: welding elbows, stamping elbows, casting elbows and so on. Purpose: connect two pipes to make the tube in right angle, 45 °or 180 °direction.According to the angle of the elbow, there are 45 °, 90 °and 180 °.
The basic process of carbon steel elbow is: first, welding a polygonous ring shell with a cross section or a polygonal fan shell with closed ends, the internal pressure is applied after the pressure medium is filled inside. Under internal pressure, the cross section is gradually changed from polygon to circle, and finally becomes a circular ring shell. A circular ring shell may be cut into 4 90 °bends or 6 60 °bends or other elbows of other specifications, as required, and this process is suitable for the manufacture of any large elbow of a specification whose ratio of middle diameter to inside diameter of the elbow is greater than 1.5 times, It is an ideal method for manufacturing large carbon steel elbows at present.
90°Elbows Pipe Fittings
If you require further information or you do not see what yo need in our web,please do not hesitate to contact us. Our customer service specialists will be happy to help you.
contact us any
Other supplier products
|
|
Equal Tees Pipe Fittings |
Three links also known as pipe fittings or three-way pipe fittings, three-way joints, etc. Mainly used to change the direction of the fluid, used i... |
|
|
Seamless Alloy Steel Boiler Tubes |
Seamless Alloy Steel Boiler Tubes
OD:10-530mm
Wall thickness:1.5-70mm
A steel pipe made of a single piece of metal and having no seams on... |
|
|
Concentric Reducer Pipe Fittings |
Product specification: 3 / 4 "X 1 / 2" -48 "X 40" [DN 20 X 15-1200 X 1000]
Wall thickness size: Sch. 5s 160
Standard: GB/T12459-2005, (ANIS),... |
|
|
ASTM A501 Hot Formed Seamless Steel Structural Tubes |
Standard : ASTM A 501
Grade: A , B ,
Out Diameter : 30mm-500mm
Wall thickness : 2mm-30mm
Schedules : 10,20, 30, 40,60, Standard (STD), Extra He... |
|
|
ASTM A210 Seamless Carbon Super Heater Tubes |
ASTM A210 Seamless Carbon Super Heater Tubes
Grade :A210A1、A210C
OD:12.7 to 127 mm
WT:0.9 to 12.7 mm
ASTM A210 is the standard covers... |
供应产品
Same products
