Gypsum Powder Production Line
GypsumPowderProductionLine
10,000--200,000MT/Year
ContentofCaSO4.1/2H2Oingypsummine80%
Thegradeofmineandthecrystalconfigurationwillinfluencethequalityofsemi-hydratedgypsum
3,Working principle
The main working principle for calcining system, of calciner
The main body of calciner consists of fine diameter intensive radiator pipes. Thermal oil fed into the coil pipes. The heat releases into power by heat exchanger. Roots blow installed at bottom of calciner for putting the cooling air into furnace by grid plate. the cooling air blows gypsum power in furnace for reaching boiling state. at certain temperature , the calcined gypsum power will lighten, and flow automatically to outlet. this type gypsum power is state in quality. it is easier to control the content of free water ,initial and final setting times.
Moreover, our equipments adopt dry electric precipitator, dust collection efficiency is over 95%.
4, Simple structure, durable equipment
The boiler does not need rotary components because the materials has come true fluidization. it simplifies the structure, manufacture and maintenance. in any case, the furnace will not damage since it uses low-temperature heat source. The life span is much longer than normal type.
5, Compact, space saving
Calciner is a kind of vertical equipment. The dust collector installed on the top of it as whole body. this design is good at space saving, and avoids moisture condensation on corona lines of dust collector.
6,Low energy consumption
Calciner consumes less electric energy and heat energy
Heat energy(transfer to material from heat source): almost all of the heat energy efficiently served as dehydration for materias.only little is scattered by the calciner body, and used to heat the cooling air from the bottom of the fluidized oven. The heat efficiency of fluidized oven
N itself is above 95%.of course,calciner uses secondary energy. that is , the final heat efficiency is not the heat efficiency of fluidized oven itself. It is the heat efficiency of fluidized oven itself multiplying the heat efficiency of other boiler. However, the steam boiler or thermal oil furnace has higher heat efficiency as widely used thermal equipment. Normally steam boiler is 60-70 %. In addition, normally the thermal oil furnace is up to 70-80%.Therefore, the final heat efficiency is 57-67% if you adopt steam boiler; it is will up to 67-76% when you choose thermal oil furnace. the traditional calcining equipment uses primary source, but heat efficiency is no more than 50%.the index of heat consumption for fluidized oven is 7.7 x 105 KJ/t in china.
Power energy: rotary equipment and mixer are not necessary for calciner. The material completes fluidization by steam from gypsum dehydration. The power of air blower is smaller since it only needs a little air for fluidization for ths reason, calciner consumes less electric energy than traditional equipment.
The phase transition of gypsum is stable because we adopt low-temperature heat source. finish product is nearly no raw gypsum, anhydrous gypsum only less than 5%, and the rest is semi-hydrate gypsum if the discharge temperature is suitable. The composition is ideal and physical performance is very steady.
Our company developed completely set of producing and processing kills on fluidized oven for satisfying the requirements. We adopt qualified steel as main material. For example, we adopt seamless steel tube(GB3087-82) as thermal oil pipes; we adopt special carbon steel plate and low alloy steel plate(GB 712-86) for oven; we adopt GB products on frame steel.
在线联系供应商
Other supplier products
| Gypsum Ceiling Production Line | Gypsum Ceiling Production Line (Calcium Silicate Ceiling Tiles production line) Gypsum Ceiling Tiles Production Equipment According to shortage of... | |
| Potassium Ethylhexanoate | Potassium Ethylhexanoate Molecular formula: C8H15O2K molecular weight: 182 Properties: White powder or white powder solid, soluble in water and al... | |
| sulphur black | sulphur black Sulphur Black BR200% 501 Sulphur Black BR200% 588 (522) Sulphur Black BR240% 501 Sulphur Black BR240% 588 (522) Sulphur Black B 20... | |
| HPMC/Hydroxyproyl Methyl Cellulose For Ceramic Tile Filler | HPMC/Hydroxyproyl Methyl Cellulose For Ceramic Tile Filler 9004-65-3 C12H20O10 220-971-6 Construction Adhesive Hebei, China (Mainland) Refined... | |
| Paper-making Grade CMC: | CMC is a high-efficiency paper-making auxiliary, and features good moisture retention, dispersibility. Pigment coating: CMC can help control and r... |
Same products
| Decoupling Tank / Hydraulic Separator | 卖方: Yuhuan Jinyi Hardware Co., Ltd. | The Decoupling Tank / Hydraulic Separator from Yuhuan JINYI Hardware Co., Ltd. is designed to imp... | |
| 100mg Lyophilized Peptide Powder | 卖方: 871344 | Whatsapp : +40 767 772 668Signal : Townrunner.01 99%+ Pure: Ensures superior efficacy for sk... | |
| 动态版激光驱鸟器应用变电站驱鸟 | 卖方: 深圳市特力康科技有限公司 | 产品名称:动态版智能激光驱鸟器 产品型号:TLKS-PSB102 产品类别:防鸟设备系列 一、产品概述 近年来,随着生态环境的不断改善,大自然中生活的鸟类种群数量及活动范围逐渐增大... | |
| 上海韩东 BDC 系列气动多片摩擦式离合器 | 卖方: 上海韩东机械科技有限公司 | 韩东 BDC 型气动多片离合器,通气接合、弹簧复位分离。体积小、传递扭矩大,散热性能好,可长时间连续工作。适配轮胎机械、压延、裁断设备,可与气胀轴、安全卡盘、气动制动器配套使用,质保 12 个月。 | |
| brake NAB | 卖方: 上海韩东机械科技有限公司 | NAB 气动制动器(通轴摩擦式,正好适配 轮胎裁断 / 压延放卷) ✅ 工作原理 结构:活塞、摩擦片、复位弹簧、散热法兰、涨紧套(T 型)/ 键槽(S 型) 通气制动:压缩空气进入... |























