Taber Abrasion Tester (Double-Head)
Standards
- DIN Standards: DIN 53754 (plastics), DIN 53109 (paper/board), DIN 52347 (glass/plastics)
- ASTM Standards: ASTM D1044 (transparent plastics), ASTM D3884 (textiles), ASTM D4060 (coatings)
- ISO Standard: ISO 5470 (rubber/plastics-coated fabrics)
- TAPPI Standard: TAPPI T476 (paper/paperboard abrasion)
Product Advantages
- Dual-Testing Efficiency: Simultaneous testing on two independent stations doubles productivity, ideal for high-throughput laboratories.
- Wide Applicability: Suitable for luggage, carpets, automotive interiors, textiles, coatings, metals, electronics, and more.
- Precision Engineering: Adjustable pressure settings (125–1250g per wheel) and digital speed control (30–75 RPM) ensure standardized testing.
- User-Centric Design: Intuitive LCD interface with preset cycle counts (1–999,999 revolutions) and vacuum debris removal for accurate results.
- Versatile Compliance: Meets ASTM's dual-head method requirements and global industry standards.
- Quiet Operation: Branded silent motor minimizes noise during extended testing sessions.
Product Features
- Dual Testing Stations: Independent control of two abrasion heads for parallel testing or comparative analysis.
- Digital Control Panel: Real-time speed display, adjustable RPM, and programmable cycle counters with automatic stop.
- Adjustable Vacuum System: Height-customizable suction port adapts to material thickness, ensuring debris-free testing.
- Modular Abrasion Wheels: Interchangeable wheels (e.g., CS-10, H-18) and sandpaper discs for material-specific wear simulation.
- Precision Balancing: Rear-arm counterweights (250g, 500g, 750g, 1000g) enable ASTM-standard 125g pressure and beyond.
- Sample Preparation Kit: Includes sample stickers, diamond polishers, and vacuum attachments for seamless workflow.
Technical Parameters
| Parameter | Specification |
|---|---|
| Rotational Speed | 30–75 RPM (digital adjustment) |
| Sample Diameter | 100 mm (per station) |
| Test Platform Diameter | 113 mm (per station) |
| Cycle Range | 1–999,999 revolutions (presettable) |
| Empty Arm Pressure | 250g (standard) |
| Weight Options | 250g, 500g, 750g, 1000g (included) |
| Wheel Pressure Range | 125g, 250g, 500g, 750g, 1000g, 1250g (per station) |
| Vacuum Arm Adjustment | Height-adjustable (per station) |
| Power Supply | 220V, 50Hz |
| Dimensions | 220 (W) × 380 (D) × 300 (H) mm |
| Net Weight | 20 kg |
在线联系供应商
Other supplier products
 |
Foam cutter | Standards JB/T 11346-2013 EN 12100 UNE-EN 14886:2008 Scope of application This machine is mainly used for cutting foam materials, which can ... |
 |
Veslic Multi-Functional Material Tester for Advanced Quality Control-QINSUN | Standard ISO 13934-1(Tensile Properties of Fabrics) ASTM D624(Tear Strength of Rubber and Elastomers) AATCC 135(Dimensional Changes in Textiles ... |
 |
Vibration and Abrasion Resistance Tester for Automotive Wire-to-Wire | Standard ISO 6722: Road vehicles – Flexible cables for wiring harnesses SAE J1128: Low-voltage primary cable for automotive application... |
 |
Xenon Arc Weather Ometer SI4000 | Introduction： SI4000Xenon Arc Weather Ometer utilizes a xenon lamp to simulate ideal natural climate and sunlight conditions. It is suitable for t... |
 |
Smoldering performance test furnace of thermal insulation material | Product Introduction: Thermal insulation material smoldering test furnace is a performance test device, using intelligent touch screen control sys... |
Same products
 |
Seat Bumping and Creep Test Bench | 卖方: Standard International Group (HK) Limited | This test bench is used for simulating the car seat bumping and creep situation when a car is run... |
 |
Automobile seat belt fixed point test bench | 卖方: Standard International Group (HK) Limited | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur... |
 |
Impact strength tester for car seat headrest | 卖方: Standard International Group (HK) Limited | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi... |
 |
Impact strength tester for car seat launching headrest | 卖方: Standard International Group (HK) Limited | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w... |
 |
Automobile Headrest Strength Tester | 卖方: Standard International Group (HK) Limited | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me... |
