DMD motor driven high pressure tank washer
STD DMD motor-driven three-dimensional cleaners are suitable for small to medium sized tanks and IBC totes, such as fuel ethanol, beer, chemical, industrial fermentation industries and occasions that require high-impact cleaning.
Working Principle:
The cleaner gun is driven by an external motor to drive cleaning head to rotate.
The gear mechanism runs according to the set trajactory to realize rotation and revolution,
thereby realizing 360 coverage impact indexed cleaning of the inside of tanks and process vessels.
Features & Benefits:
●High Using dynamic seal at leakage point to reduce leakage (less than 3% leakage). thus saving cleaning fluid.
●The nozzle have a unique steady flow design which can make the jet be more concentrated and have great impact.
●Driven by external motor, thereby reducing the pressure loss of water flow, and resulting in higher water impact.
Application:
This DMD series high pressure motor-driven three-dimensional cleaners are suitable for small to medium sized tanks and IBC totes, such as fuel ethanol, beer, chemical, industrial fermentation industries and occasions that require high impact cleaning.
在线联系供应商
Other supplier products
 |
Textile moisture absorption and heat generation performance tester | Application ScopeThe textile moisture absorption and heat generation performance tester is a dedicated instrument for testing the moisture absorpti... |
 |
Moisture friction and wear testing machine | Product Introduction: The hydraulic plastic friction and wear testing machine meets the standard "GB/T3960-2016 plastic sliding friction and wear ... |
 |
Universal finger friction tester | Brief Introduction The main working principles of this device is through a test head, plus a certain amount of pressure, and carry a variety of ... |
 |
New energy wire and cable extrusion & scraping tester | Product Introduction: The new energy wire and cable extrusion jacket scratching tester is used to test the scratching resistance of the plastic ... |
 |
Shoelace Abrasion Tester | Standards SATRA TM93、DIN-4843、QB/T2226、SATRA TM154 Principle Let shoelace cross the eyelet clamped on the fiber board, make the shoelace and eye... |
Same products
 |
Seat Bumping and Creep Test Bench | 卖方: Standard International Group (HK) Limited | This test bench is used for simulating the car seat bumping and creep situation when a car is run... |
 |
Automobile seat belt fixed point test bench | 卖方: Standard International Group (HK) Limited | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur... |
 |
Impact strength tester for car seat headrest | 卖方: Standard International Group (HK) Limited | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi... |
 |
Impact strength tester for car seat launching headrest | 卖方: Standard International Group (HK) Limited | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w... |
 |
Automobile Headrest Strength Tester | 卖方: Standard International Group (HK) Limited | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me... |
