Retractable CIP rotary spray nozzle
STD-150 retractable CIP rotary spray nozzle
Dynamic Retractor CIP systems clean even the remotest corners. Where to attach the spray head? This question arises with nearly every CIP installation. In most cases, spray shadows caused by baffles, such as agitators, manholes, inspection glasses and a host of other muffs complicate the setup of an efficient CIP cleaning. The solution for this is a retractable cleaning systems.
An elegant solution is a so-called retractor using flood cleaners. A pneumatic drive extends the flood cleaner to its place of operation. This in itself is nothing new: technical variations have been known on the market for many years. The STD retractable tank cleaning nozzle combines this fundamental idea with the modern demands on a CIP cleaning system. Depending on the cleaning head model and the working pressure, flow rates between 1 and 10 m³/h are currently possible. A detergent pressure between 1 and 8 bars can be selected.
Another important component of the retractable tank cleaning nozzle is the hydraulic pipe. Employing the new pipe standard DIN 11866 permitted a considerable reduction of the installation size and thus of the cavity into which the spray head is retracted.
Some important features at a glance:
low wear PEEK body
slide bearing
easy to maintain
drainable
designed for the food Industrie
spray nozzle Application:
STD-150 series retractable rotary nozzle are well suited to pharmaceutical, food and beverage, chemical and other industries. Particularly suitable for pipes and corner,such as spray dryer.
Spray dryer
Fluid bed dryers
Granulator
Pipe
在线联系供应商
Other supplier products
 |
Cylindricity Tester | Performance Overview: The cylindrical instrument can measure the roundness, cylindricity, straightness, concentricity, coaxiality, flatness, paral... |
 |
High - voltage DC Stability Tester | The high - voltage DC stability tester is suitable for testing DC high - voltage within the range of 0.1 - 5.00KV and continuously recording the ... |
 |
Fogging Tester | Standards DIN 75201: Automotive trim material fogging resistance. ISO 6452: Coated fabrics fogging behavior in vehicle interiors. SAE J1756: A... |
 |
Safety Helmet Flammability Tester | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retardant performance test, high degree of automation, ... |
 |
Swimming goggles sealing tester | Applicable standards: Seal test equipment for swimming goggles according to ISO 18527-3 Product Introduction: The tightness of goggles according... |
Same products
 |
Seat Bumping and Creep Test Bench | 卖方: Standard International Group (HK) Limited | This test bench is used for simulating the car seat bumping and creep situation when a car is run... |
 |
Automobile seat belt fixed point test bench | 卖方: Standard International Group (HK) Limited | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur... |
 |
Impact strength tester for car seat headrest | 卖方: Standard International Group (HK) Limited | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi... |
 |
Impact strength tester for car seat launching headrest | 卖方: Standard International Group (HK) Limited | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w... |
 |
Automobile Headrest Strength Tester | 卖方: Standard International Group (HK) Limited | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me... |
