TPU Slip Masterbatch & Frosted Matte Masterbatch for Engineering Plastics
Anmei company specializes in the production of TPU slip masterbatchingredients and TPU frosted matte masterbatch excellent dispersibility in cast films. Casting film can be compounded with plastic woven cloth during production to be used as shade cloth and tourist tents.
TPU anti-block masterbatch is designed to prevent blocking during the extrusion of thin TPU film and improves the bound ability of TPU film.
Problem & Solution of Masterbatch Application in Cast Film
Problem1:
Moisture in the tpu masterbatchor poor heat resistance of the ingredients will cause the cast film to have a network structure.
Solution1:
Appropriately reduce the temperature of each zone and dry the masterbatchin the cast film production process.
Color masterbatch should bechosen pigments with high color strength and good heat resistance,andthen strengthen the blowing, and appropriately increase the water temperature.
Problem2:
The low content of titanium dioxide in the film will lead to the poor hiding power of the cast film.
Solution2:
Increasing the amount of masterbatch
Increasing the content of titanium dioxide in the masterbatch
Problem3:
Poor pigment dispersion leads to colored spots on the cast film.
Solution3:
Choosing masterbatch with good dispersibility ingredients.
Problem4:
The volatile matter in the masterbatch causes smoke during processing.
Solution4:
Reducing the extrusion temperature
Choosing high-temperature resistant masterbatch
Suzhou ANMEIMaterial Technology Co., Ltd. – the professional supplier of engineering modified plasticand the color masterbatch was founded in 2013, which is located in Tongli - the millennium ancient town, 50km far away from Shanghai, the location is very convenient for transportation.
在线联系供应商
Other supplier products
 |
Anmei-Polyamide Nylon 6 (PA6) for Engineering Plastics | Other than fiber-reinforced pa6 polyamide, the unreinforced nylon type 6 produced by Anmei, one of the professional nylon 6 suppliers/manufacturers... |
 |
PA6 GF30 Halogen-free FR (A1015F) for Engineering Plastics | PA6FRis a PA6 with 30% glass-fibers and flame retardant free of halogens. Typical Application of PA6 GF30 halogen-free FR (A1015F) PA6 GF30flam... |
 |
PA6 GF50 (A1011J) for Engineering Plastics | PA 6 GF50is a fiber reinforced plastic made of nylon 6 resin as a base material and 50% glass fiber as a reinforcing filler, and various processing... |
 |
PA66 GF35 (A2000G, A2011G, A2111G) for Engineering Plastics | PA66 is nylon 66, namely pa66_gf35is glass fiber. Generally expressed as PA66 GF35, that is, 35% glass fiber is added to nylon 66. Typical Appli... |
 |
PA6 GF30 Halogenated FR (A1014F) for Engineering Plastics | PA6 GF 30 FRis a PA6 with 30% glass-fibers and halogens flame retardant. PA6 GF30 Halogenated FR Features Glass fiber reinforced 30% ... |
