Heavy Wall Polyolefin Heat Shrink Tube
Heavy Wall Adhesive Lined Heat Shrinkable TubeThe wall thickness of Heavy wall heat shrinkable tubing was much thicker than Middle wall heat shrink tube. So it has high voltage insulated property. It can be used for 10kv insulation. And also this tube provides maximum reliability for insulation and protecting cable joints and terminations.FeaturesWithstands severe mechanical requirements.Rated for10kv ,Website:℃ continuous use.Optional thermoplastic adhesive liner for complete environmental protection and insulation.Continuous Operation Temperature:-45 ºċ to 125ºċ.Shrink Temperature:125ºċ.SizeAs SuppliedAfter RecoveryStandard
length (M/pc)mmInternal Diameter(mm)Internal DiameterOut layer Wall ThicknessAdhesive Layer Wall ThicknessTotal Wall Thickness9/3≥9≤32.0±0.200.35±0.12.30±0.251.2213/4≥16≤42.4±0.200.35±0.12.75±0.251.2220/6≥19.1≤62.5±0.200.40±0.12.90±0.251.2228/9≥25≤92.5±0.200.40±0.12.90±0.251.2233/10.2≥33≤10.23.2±0.250.40±0.13.60±0.251.22238.1/12≥38.1≤123.4±0.200.60±0.154.00±0301.2243.2/12.7≥43.2≤124.3±0.200.70±0.355.00±0351.2251/16≥51≤164.3±0.200.70±0.355.00±0351.2270/21≥70≤214.3±0.200.70±0.355.00±0351.2285/25≥85≤254.3±0.200.70±0.355.00±0351.22105/30≥105≤304.3±0.200.80±0.355.10±0351.22120/39≥120≤394.3±0.200.50±0.355.10±0351.22140/42≥140≤424.3±0.200.60±0.355.10±0351.22Technical Date:PropertyTest MethodStandardTensile Strength(Mpa)ASTM D2671≥10.4Elongation(%)ASTM D2671≥300Density(g/cm3)ASTM D7921.2Longitudinal change(%)UL 224≤±10Elongation after aging(%)UL224 158?? X168hrs≥200Heat shockUL224 225?? X4hrsNo crackingDielectric strength(kv/mm)IEC 243≥20Volume resistivity(Ω.cm)IEC 93≥1014Water absorption(%)ASTM-D570≤0.5Hot Melting Adhesive PropertyPropertyTest MethodStantardWater absorptionASTM D570≤0.2%Softening pointASTM E2895℃Peel strength(PE)ASTM D1000120N/25mmPeel strength(AL)ASTM D100080N/25mm
Other supplier products
|
|
|
Nylon 11 TubingPolyamide 11 tubing a kind of plastic tubing that is light weight, Low water absorbing and low temperature resistance. This kind of ... |
|
|
|
Silicone braided hosePlatinum-Cured braid reinforced silicone hose is made from raw materials that meet FDA requirements. Silicone braided hose was... |
|
|
|
Platinum-Cured 4-Ply Fabric and SS Wire Reinforced Silicone hoseLow volatile grade,Website:, platinum-cured silicone hose, for critical pharmaceuti... |
|
|
|
FEP tubingFEP tubing remains basically the properties of PTFE, like excellent high & low temperature resistance, chemical stability, high non-adhes... |
|
|
|
Nylon anti spatter tubingNylon ant-spatter tube has high work pressure and work temperature than Polyurethane anti spatter tubing. Nylon anti-spatt... |
供应产品
Same products
