PA6 GF
Anmei-PA6 GF for Engineering Plastics
As an engineered plastics company, Anmei focuses on the production of modified engineering plastics, among which high-performance nylon 6 engineering plastics are one of our main products. We have nylon 6 modified plastics of heat-resistant, reinforced, toughened, flame-retardant, wear-resistant, weather-resistant, oil-resistant and conductive with glass fiber filling ranging from 15% to 50%. The mechanical properties of blended materials such as glass fiber and toughening agent added to nylon show that with the increase of glass fiber content, the tensile strength, impact resistance and heat resistance are better, and the bending strength has been greatly improved as well, which meet the requirements of industrial products and daily use. The polyamide 6 pricethat Anmei offers is very competitive. Contact us now to get more detailed information about PA6 price.
Types of PA6 GF
As one of engineering plastic manufacturers, we provide polyamid PA6 GFto meet the specific needs of various applications.
Our pa 6 materialsuch as pa6 gf45, pa 6 gf 35, pa6 gf 25has very high rigidity, high mechanical strength, high hardness and toughness, and high creep strength. Moreover, they have very high dimensional stability, good fatigue resistance, and high mechanical damping properties. Click below to check more about types of pa gf plasticin Anmei.
PA6 GF15
PA6 GF15 heat stabilized is the reinforced PA6 by mixing the glass fiber of 15%. It can be in different colors with excellent high-temperature resistance comprehensive properties.
PA6 GF20
PA6 GF20 (A1000D)
PA6 GF20 With High Tensile Strength
PA6 GF20 Heat Stabilized
PA6 GF20 Halogenated FR
PA6 GF20 Halogen-free FR
PA6 GF20
PA6 GF20 is a PA6 material reinforced with 20% glass fiber.
PA6 GF30
PA6 GF30 (A1000F, A1011F)
PA6 GF30 With High Tensile Strength
PA6 GF30 Heat Stabilized
PA6 GF30 Halogenated FR
PA6 GF30 Halogen-free FR
PA6 GF30
PA 6 GF30 is a 30 % glass fiber reinforced polyamide 6.
PA6 GF35
PA6 GF35 (A1000G, A1011G)
PA6 GF35
PA6 GF35 is adding 35% glass fiber to the base material of PA6.
PA6 GF45
PA6 GF45 (A1011I)
PA6 GF45
PA6 GF45 is polyamide PA6 reinforced with 45% glass fibers.
PA6 GF50
PA6 GF50 (A1011J)
PA6 GF50
PA6 GF50 is a fiber reinforced PA 6 plastic made of nylon 6 resin as a base material and 50% glass fiber as a reinforcing filler, and various processing aids be added.
What Is PA6 Material/ what is pa6？
Polyamide (Nylon) of Anmei is a versatile engineering plastic that is available in different "grades" and applied accordingly, which is one of the most extensively used polyamides globally. PA 6 (Polyamide 6) and PA 66 (nylon 66 PA66) are used for parts required for large repetitive jobs. PA 6 GF provides enhanced strength and abrasion resistance while maintaining a low weight for improved balance and reduced vibration.
PA6 stands for polyamide 6, which is a type of thermoplastic material that is widely used in various industrial applications. It is also commonly known as nylon 6, which is a synthetic polymer made from the monomer caprolactam.
PA6 plastic has a high tensile strength, good abrasion resistance, and excellent chemical resistance, making it suitable for use in applications such as automotive parts, electrical components, and sporting goods. It also has a relatively low melting point, which allows for easy processing and molding.
In addition, PA6 plastic is known for its excellent dimensional stability and low moisture absorption, which makes it an ideal material for applications where tight tolerances and precision are required.
Overall, PA6 plastic is a versatile and durable material that is widely used in many industries due to its excellent properties and ease of processing.
What is the difference between GF15 and GF50
The number of glass fibers per unit area of the material will increase when the glass fiber content increases, which means that the PA6 matrix between the glass fibers will become thinner. This change determines the changes in the mechanical properties of glass fiber reinforced PA6 composites in terms of tensile strength, impact toughness, flexural strength, etc. But it's not that more glass fiber is better. The content of glass fiber higher than 42% will cause the notched imPAct strength to show a downward trend. 15% has high rigidity and strength, excellent durability (heat resistance, weather resistance, oil resistance), suitable for pump impeller, motor housing, etc., 30% and 45% are suitable for replacing some metal materials, and 50% content is suitable for long-term heat Stable performance and automobile engine parts which need excellent strength and toughness.
Why Choose Anmei PA6 GF
There are 3 key elements to improve GF reinforced PA6 material.
01
GF dosage is the primary factor.
In the dosage range of 0-35%, increasing the dosage of GF can sinicanty improve the mechanical properties of PA6.
Reason Of Choosing Anmei PA6 GF
02
The final retention length of GF determines the reinforced effciency.
The choice of the initial length of GF and the degree of damage to GF in the processing engineering determine the retained length. Selecting LGF, and reducing the damage to GF as much as possible by adjusting the screw speed and arranging the position of GF in the process of processing and molding, is the key to improving the mechanical properties of GF to enhance the PA6 material.
Reason Of Choosing Anmei PA6 GF
03
The processing technology determines the level of GF dispersion.
Ensuring GF can be evenly dispersed is the key point.
ANMEI polymer experts can offer your professional options based on your products.
Performance comparison between PA6 and glass fiber reinforced PA6
PA6 plus 30% glass fiber (PA6 GF30 plastic) is commonly used as the motor support and roller brush body of a vacuum cleaner due to its high wear resistance and high-temperature resistance. Because it needs to withstand the continuous impact of high-speed dust and particles, the strength requirement is very high.
在线联系供应商
Other supplier products
 |
Anmei-ABS Engineering Plastic | ABS resin is a terpolymer composed of acrylonitrile, butadiene and styrene. ABS has the rigidity, chemical resistance and heat resistance of polyac... |
 |
Anmei-Polyamide Nylon 66 (PA66) for Engineering Plastics | Nylon 66 is polyamide 66. The main purpose of Nylon 66 plastic modification is to improve the properties of Nylon 66 material based on the original... |
 |
PA6 GF15 With High Tensile Strength (A1307C, A1317C) for Engineering Plastics | PA6 GF15with high tensile strength is made by 15% glass fiber reinforced, toughened, polyamide 6 resin for injection molding. Typical Applicatio... |
 |
PA6 GF30 Halogen-free FR (A1015F) for Engineering Plastics | PA6 FRis a PA6 with 30% glass-fibers and flame retardant free of halogens. Typical Application of PA6 GF30 halogen-free FR (A1015F) PA6 GF30f... |
 |
Masterbatch | We are here to be your reliable partners of Color Masterbatch. Color masterbatches are widely used in polyethylene(PE), polypropylene(PP), polysty... |
Same products
 |
COLMAST®CW1350（白色母粒） | 卖方: ADC PLASTIC., JSC | COLMAST CW1350因其突出的优点和与不同类型的初级塑料树脂（PP、PE、ABS...）的结合而成为完美的选择，白色母粒越来越广泛地应用于编织袋、塑料制品的注塑等。 .. 请访问我们的... |
 |
CALMAST®MN570 – PP碳酸钙填充母粒 | 卖方: ADC PLASTIC., JSC | CALMAST MN570 是帮助塑料制品制造商优化成本并提高机械和物理性能（例如耐热性、表面改善、提高成品的撕裂强度和拉伸强度）的完美选择。 特别是提高最终产品加工的稳定性。 请访问我们的网... |
 |
CALMAST®MF530 – PP碳酸钙填充母粒 | 卖方: ADC PLASTIC., JSC | CALMAST MF530 是帮助塑料产品制造商优化成本并提高机械和物理性能（例如耐热性、表面改善、提高成品的冲击强度和拉伸强度）的完美选择。 特别是提高最终产品加工的稳定性。 请访问我们的网... |
|
|
PA6 GF30 Halogen-free FR (A1015F) for Engineering Plastics | 卖方: Suzhou Anmei Material Technology Co., Ltd | PA6 FRis a PA6 with 30% glass-fibers and flame retardant free of halogens. Typical Applicati... |
 |
PA6 GF30 Halogenated FR (A1014F) for Engineering Plastics | 卖方: Suzhou Anmei Material Technology Co., Ltd | PA6 GF 30 FRis a PA6 with 30% glass-fibers and halogens flame retardant. PA6 GF30 Halogenated ... |
