Silicone rubber for computer keyboard,Colorful Silicone Rubber,Fast Curing Liquid Silicone Rubber
PRODUCT DESCRIPTION:
This series are 2-part liquid silicone rubber suitable for injection molding processes, catalyzed by platinum.
KEY FEATURE:
1. Good rebound property, excellent thermal and cold stability (-60-250),
2. Good fluidity, easy to be injected, stable shrinkage rate,
3. At the temperature of 25 and in the condition of air-proof, the shelf life is 3 days after mixing A and B, the shelf life will decrease with the increasing of the temperature.
APPLICATION:
The series are suitable for making lining of computer keyboard
PACKAGING:
It is available in 20kg pails or 200kg drums
TYPICAL PROPERTIES:
Appearance:translucence
Viscosity(mps):65000~90000
Hardness: 40 Shore A
Tensile strength(MPa):5.0~5.5
Tear resistance(KN/m): 15~18
Elongation at break:300%~330%
Linear shrinkage: 0.1%
REMARK:
1. The product should be closed tightly, protected from light and moisture, the shelf life is 12 months
2. These figures are for reference only, please contact us for detail.
ABOUT US:
We are engaged in silicone rubber's R&D since 1996,there are experienced technicians and workers in our company,as well as advanced equipment.We produce almost all kinds of silicone rubber,which we believe must meet your possible requirements, no matter what you need to produce by silicone rubber.
What's more,our silicone rubber are environmental-friendly production,with high safety and no toxic.You can absolutely trust your choice with us.
For more information, welcome to contact Lilian:
Phone:
E-mail: lilian(at)
/>Company: XINRUN GROUP LIMITED
Factory address:No.2,Zhouliao Road, Langzhou Industrial Zone,Changping, Dongguan, Guangdong, China
Other supplier products
|
|
Liquid silicone rubber material for kitchenware,High temperature resistance Silicone Rubber,Low Shrinkage Silicone Rubber |
PRODUCT DESCRIPTION:The series is and tear strength, 2-part liquid silicone rubber suitable for injection molding processes.KEY FEATURES:1. H... |
|
|
Electronic Potting Compound Silicone, |
Product DescriptionThe product is one kind of transparent, 2-part liquid silicone rubber, catalyzed by platinum, good adhesion streng... |
|
|
Addition Silicone Putty for Dental Molds |
INTRODUCTION:It is a hydrophilic addition silicone rubber impression material, it contains two components, Part A is platinum catalyst, and P... |
|
|
Silicone Rubber with Low Melting Point,Liquid Silicone Rubber Material |
DESCRIPTION:Manual model silicone is flowing liquid RTV silicone with stable quality. Before you begin to put your design in production for... |
|
|
Silicone rubber for computer keyboard,Colorful Silicone Rubber,Fast Curing Liquid Silicone Rubber |
PRODUCT DESCRIPTION:This series are 2-part liquid silicone rubber suitable for injection molding processes, catalyzed by platinum.KEY FEATUR... |
供应产品
Same products
