Silicon Rubber for Shoe mold making
LIQUID RTV-2 SHOE MOLD SILICONE RUBBER APPLICAITONS:
Shoe mold silicone rubber is mainly used for shoe molds, sand casting, sole sampling, plaster models, simple products,products with non-complex patterns, as well as product models with stable size and non-deformation.
LIQUID RTV-2 SHOE MOLD SILICONE RUBBER FEATURES:
1.Two-component silicone rubber with tin-catalyst
2.Cured under room temperature
3.Low shrinkage
4.Excellent fexibility & easy demould
LIQUID RTV-2 SHOE MOLD SILICONE RUBBER USING INSTRUCTION:
The component A of shoe Mold Silicone Rubber is white flowing liquid and the component B is the curing agent. For example, take silicone rubber of 100g and add 2% curing agent for mixing evenly. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles. After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame.
LIQUID RTV-2 SHOE MOLD SILICONE RUBBER NOTES:
Shoe mold silicone rubber is used for pouring or brushing technique. That is to say, fix the product or sole model to be duplicated onto a plane plate, then enclose the plane frame with wooden plates to prevent the leakage of the silicon , mix the silicone rubber and the curing agent evenly according to the mixing ratio of 100 : 2 and pour them onto the sole model, then brush evenly with a wooden plate or a brush, and fill up the mold frame with gypsum after the silicone rubber is dried.
ABOUT US:
We are engaged in silicone rubber's R&D since 1996,there are experienced technicians and workers in our company,as well as advanced equipment.We produce almost all kinds of silicone rubber,which we believe must meet your possible requirements, no matter what you need to produce by silicone rubber.
What's more,our silicone rubber are environmental-friendly production,with high safety and no toxic.You can absolutely trust your choice with us.
For more information, welcome to contact Lilian:
Phone:
E-mail: lilian(at)
/>Company: XINRUN GROUP LIMITED
Other supplier products
|
|
Silicone Rubber for Ceramics mold making, |
FEATURES OF CERAMICS MOLD MAKING SILICONE RUBBER:-Mixing ratio of catalyst 2%-5%-Good flowability-Great self-deaeration-Very good heat resis... |
|
|
Silicone Rubber Material For Toys,Manual mold making silicone rubber,High Safety Silicone Rubber |
DESCRIPTION OF MANUAL MOLD DESIGN MAKING LIQUID SILICONE RUBBER RAW MATERIALS:This is a kind of room temperature vulcanized silicone rubber ... |
|
|
Candles Mold making Silicone Rubber,Low Shrinkage Silicone Rubber,Crafts Mold Making Silicone Rubber |
FEATURES OF CANDLES MOLD MAKING SILICONE RUBBER:-Mixing ratio of catalyst 2%-5%-Good flowability-Great self-deaeration-Very good heat resista... |
|
|
Silicone rubber for making logo sheet,Multiple Hardness |
PRODUCTS DESCRIPTION:The product is one kind of transparent, 2-part liquid silicone rubber, catalyzed by platinum, suitable for injection ... |
|
|
Silicone Rubber with Low Melting Point,Liquid Silicone Rubber Material |
DESCRIPTION:Manual model silicone is flowing liquid RTV silicone with stable quality. Before you begin to put your design in production for... |
供应产品
Same products
