.

SPD for Audio Surge Protector

With a standard RJ11/45 interface, the audio signal lightning protection device is suitable for audio signal lightning protection of 1 to 4 pairs of dedicated communication lines and protection of trunk lines and internal lines of program-controlled exchanges.

Surge protector for audio equipmentis mainly used in tele, public broadcasting system to protect electrical and electronic equipment's signal line from the impact of lightning electromagnetic pulse, induced over voltage, transient operation, and resonance over voltage. We provide ADSL surge suppressor, APC mobile surge arrester, surge protector with jack for landline , as well as many other customized audio SPD unit. For more information, please feel free to contact us.

Features of SPD for Audio Surge Protector

lMulti. Protection circuits, Gas-Tube+ TVS technology

lDual protection in Common module and different module

lMulti-Strike Capability

Application of SPD for Audio Surge Protector

Designed for Audio device not to be spoiled by lightning over-voltage, induced over-voltage, and static discharge.

lTele, Fax

lISDN, DDN, DSL, ADSL, VDSL

lBroadcast system

Technical parameters of SPD for Audio Surge Protector

Model

D180R2

R180R4

D180R2-16

D180Y2-10

D180Y2-A

Lighning proection zone(LPZ)

2

Standards Compliance

IEC61000, EN60950, GB/T18802.21-2002, TB/T2311-2002

According to IEC61643

III

According to DIN VDE6075 Part6(Draft 11.89) A1,A2

D

Max continuous operating voltage Uc

180VDC

Nominal discharge current (8/20µs) In

3KA

Max discharge current Imax (8/21µs) Imax

5KA

Rated Load Current

500mA

Cut-off Frequency fG

16MHz

Series Impedance per line R

Limiting Voltage(10/700µs)

≤250V

Protection level @20kA, 8/20µs Up

≤350V

Response time tA (L-N/N-PE)

1ns

Protection line

2,3/4,5

2/3,4/5

2,3/4,5

2 line

2line

Protection port

1

2

16

10

1

Mounting

Be installed between protected equipment and signal line

Transmission rate

10Mbps

Dimension

85(H)×25(W)×25(L)mm

480 (H)×86(W)×42(L)mm

96 (H)×43(W)×70(L)mm

90 (H)×14(W)×65(L)mm

Interface form

RJ11 RJ11 RJ11 Inserting type clamped type

IP code(IEC EN 60529)

IP20

Max connecting line diameter

  1. 2

Material/color

Aluminum/Blue

Recommend connection line diameter

1 mm2

Largest terminal installation torque

Working conditions

Temperature: -40 to 85℃, Relative humidity: ≤95%

If you need any kinds of lightning surge protector,please contact us, as a professional surge protector factory, Techwin is willing to offer you high quality products.


在线联系供应商

至: Shenzhen Techwin Lightning Technologies Co., Ltd
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Quarter Wave Surge Protective Device(SPD)N(L16)Access Network RF Protector
Quarter Wave Surge Protective Device(SPD)N(L16)Access Network RF Protector Quarter wave RF surge protectoris designed for the RF system, protecting the signal line of communication equipment from lightning over-voltage, in...
Din-rail DC Power SPD For PV Solar Power System
Din-rail DC Power SPD For PV Solar Power System DC module for PV solar power system is mainly used to protect DC power system and electric and electronic equipment from lightning over-voltage and...
Din-rail DC Power SPD For PV Solar Power System
Din-rail DC Power SPD For PV Solar Power System DC module for PV solar power system is mainly used to protect DC power system and electric and electronic equipment from lightning over-voltage and...
Techwin UL 1449 listed TVSS 100kA surge protection device(SPD) for AC power system
Techwin UL 1449 listed TVSS 100kA surge protection device(SPD) for AC power system HM100F Series AC power supply SPD box is mainly applicable to three phase power distribution system to protect electrical equipment from the impact...
SPD for Solar Power System/PV System
SPD for Solar Power System/PV System What Is SPDin Solar? Lightning combiner box for PV array is installed between PV module and inverter. And SPD in solar system is widely applied in...
供应产品

Same products

Ballistic Plate
Ballistic Plate 卖方: YONGKANG LONGKUI NEW MATERIAL CO.LTD Ballistic Plate A can be matched with bulletproof vest as the front or back plate to enhance...
ballistic helmet
ballistic helmet 卖方: YONGKANG LONGKUI NEW MATERIAL CO.LTD ballistic helmet A , often referred to as a tactical helmet, is a specialized piece of perso...
bulletproof vests
bulletproof vests 卖方: YONGKANG LONGKUI NEW MATERIAL CO.LTD bulletproof vests stands out as one of the premier manufacturers and suppliers in China, ren...
Bulletproof Briefcase Shield
Bulletproof Briefcase Shield 卖方: YONGKANG LONGKUI NEW MATERIAL CO.LTD Bulletproof Briefcase Shield Bulletproof Briefcase Shield Description This is a discreet, r...
Military Ballistic Helmet
Military Ballistic Helmet 卖方: YONGKANG LONGKUI NEW MATERIAL CO.LTD Military Ballistic Helmet Welcome to our comprehensive overview of the , a crucial asset in ...